Limited Edition of 3000. Includes original boxes.

The knives included in this set are:

North Carolina  (Stockman three blade)

South Carolina (Stockman three blade)

Connecticut (Muskrat two blade)                   

Massachusetts (Trapper two blade)

New Hampshire (Trapper two blade)             

Pennsylvania (Trapper two blade)

Rhode Island (Muskrat two blade)                 

New Jersey (Muskrat two blade)

Virginia (Muskrat two blade)                         

Maryland (Congress four blade)

Georgia (Congress four blade)                       

New York (Congress four blade)

Delaware (Stockman three blade)                  

Large Bone Knife

3-5/8 inches closed, 6-3/8 inches open. Made in Germany. Master blade front tang: Hen and Rooster logo plus 'Solingen Germany'. Master blade rear tang: 'Bertram Cutlery Rostfrei 113 GPB'. Secondary and third blades front tangs: 'Stainless' plus Hen and Rooster logo. Round shield with hen and rooster image. Stainless steel blades. Green Pick Bone handle. Nickel silver bolsters. Brass liner.

Shepherd Hills Exclusive. 3-1/2 inches closed. 6-1/8 inches open. Made in USA. Front Tang: x CASE XX x (Thick Longtail-C, Lightning Bolt-S) ; Rear Tang: USA 61953 L SS. Stainless Steel blade. Natural Bone handle. Nickel Silver bolsters and liner.

3-5/8 inches closed. 6-1/4 inches open. Made in USA. "Case XX **SS** USA" (4 Dot with lighting bolt S) and "G62131 SS" tang stamps. Double Oval 'Open C' Case shield. Stainless Steel blades. Green Jigged Bone handle. Nickel Silver bolsters. Brass liner.

5-1/4 inches closed. 9-1/4 inches open. Made in USA. "      CASE XX    x x  " (with lightning bolt S) and "USA 6265 SS" tang stamps. Red oval long C "CASE XX" shield. Stainless Steel blades. Blue jigged bone handles. Nickel Silver bolsters. Brass liner.

4 inches closed. 7 inches open. Made in Germany. Front Tang Master Blade : 'Solingen, Germany' with logo; Master blade rear tang: 'Bertram Cutlery 343C-BRM/CR' ; Front Tang Blade 2 & 3: 'Solingen Germany' with logo. Cattle Skull Inlay shield. Stainless steel blades. Master blade etch: Cattle Rustler (Cowboys roping cattle). Brown Marble Corelon handle. Nickel Silver bolsters. Brass liner.

4-1/4 inches closed. 7-5/8 inches open. Made in USA. "CASE XX U.S.A." and "5375" tang stamps. Double Oval 'Open C' CASE shield. Chrome Vanadium blades. Stag handle. Nickel Silver bolsters. Nickel Silver and Brass liners.

Master blade etched 'Ducks Unlimited'. 3-5/8 inches closed. 6-1/8 inches open. Made in USA. Case XX (lightning S) Bradford PA 19 USA 91 and DU318 SS tang stamp. Ducks Unlimited gold shield. Stainless Steel blades. Wood handle. Nickel Silver bolsters. Brass liner.

Fixed Blade Steak Knife Set of 8 Knives. 9-1/8 inches long. Crown over Q logo tang stamp. Blades stamped "FINEST STAINLESS" with Queen logo. Bone stag handles. With original wooden storage box measuring 8-3/4" x 10" x 1-1/2" and paperwork.

4-3/4 inches closed. 8-1/4 inches open. "SOG" tang stamp". Black handles with SOG logo. With auto clip.

Single blade Peanut Pocket Knife issued as one of three Peabody Safety Award Knife Set. 2-3/4 inches closed. 5 inches open. Made in USA. "CASE XX * SS USA" and "BK6120 SS" tang stamps. Oval CASE shield with raised letters and rim. Stainless steel blades. Main blade etched 'Peabody'. Black jigged bone handle. Nickel Silver bolster. Brass liner.

3-1/2 inches closed. 5-3/4 inches open. Limited Edition. Made in USA. "CASE XX ***SS** USA" (5 dot with lightning bolt S) and "W64052 SS" tang stamps. Double Oval 'Open C' CASE shield. Stainless steel blades; master blade etched "Case XX 1985 Tobacco Commemorative" and secondary blade etched "Kentucky BURLEY". Yellow Jigged Bone handle. Nickel Silver bolsters; front right bolster etched with serial. Brass liner.

3-7/8 inches closed. 6-7/8 inches open. Made in USA. "CASE XX U.S.A. ****** " (6 dot) and "33092" tang stamps. Single oval 'open C' CASE shield. Chrome vanadium blades. Yellow composition handle. Nickel Silver liner. 

Knife is 5 inches closed, 8-1/2 inches open. Made in USA. "     x  CASE XX USA 2159L SS    x x  " (with lightning bolt S) tang stamp. Stainless Steel blade etched with image of hammerhead shark. Black handle. Brass bolsters and liner.  Front left bolster etched "CASE".

4 inches closed. 6-1/4 inches open. Made in USA. "Case XX 125 1889-2014" and "USA 61953 L SS" tang stamps. "CASE XX 125 Years 1889-2014" etched into Olive Green Bone handle. TruSharp Surgical Steel blades. Nickel Silver bolsters. Nickel Silver liner.

3-5/8 inches closed. 6-1/4 inches open. Made in Germany. Front Tangs: FIGHT'N ROOSTER (two roosters) SOLINGEN ; Rear Tang: FRANK BUSTER CELEBRATED CUTLERY GERMANY. Fight'n Rooster Logo Silver Inlay shield. Steel blade. Master Blade etched with FIGHT'N (two roosters) ROOSTER. Yellow Swirl Celluloid handle. Nickel Silver bolsters. Brass liner.

2-3/4 inch blade length, 6-7/8 inches overall length. Blade is 1/8 inch thick. Knife weighs 6.3 ounces, 8.4 ounces with sheath. Made in Spain. Ricasso stamp: 'HR-0006 Toledo Spain'. Stainless steel blade. Blade etch: H&R logo plus 'German Stainless'. Stag handle. Steel guard and pommel. Includes Hen & Rooster brand leather sheath.

3-3/8 inches closed, 5-7/8 inches open. Made in Germany. Master blade front tang: 'Solingen Germany' plus image of a hen and a rooster. Master blade rear tang: 'Bertram Cutlery 333 MOP'. Secondary blades front tangs: 'Rostfrei' with hen and rooster image. Round shield with hen and rooster image. Stainless steel blades. Genuine mother of pearl handles. Nickel silver bolsters. Brass liner.

Single-Blade Coke Bottle Lockback Knife. 5-1/2 inches closed. 9-3/4 inches open. "NEW YORK KNIFE CO. WALDEN" tang stamp. Plain crest shield. Jigged bone handle. Nickel Silver bolsters, drilled in left end and etched "NYK" front and back. Brass liner.

Made in USA by Queen Cutlery. 3-3/8 inches closed. 5-7/8 inches open. Queen logo over "USA" tang stamp. Master blade etched "THE RAWHIDE SERIES No. 4210 440 Stainless". Wood handle. Nickel Silver bolsters. Brass liner.

3-3/4 inches closed. 6-1/2 inches open. "BUCK CREEK" with Antler logo and "SOLINGEN GERMANY" tang stamps. Master blade etched "BUCK CREEK Hand made Solingen Germany". Red jigged bone handle. "BUCK CREEK" badge shield. Nickel Silver bolsters. Brass liner.

3-5/8 inches closed. 6-1/4 inches open. Made in USA. Blade 1 front tang: CASE XX **SS* USA (3 dot with lightning bolt S) ; Blade 2 front tang: R62131 SS . Stainless steel blades . Oval embossed long-tail C CASE XX shield. Red Jigged Bone handle. Nickel Silver bolsters. Brass liner.

Tony Bose design. 3-1/2 inches closed. 6 inches open. Made in USA. Front tang: x x x CASE XX x x ; (straight longtail C with lightning bolt S); Rear tang: USA TB61028 SS. Stainless Steel blades. Oval flag CASE XX shield. Navy Blue jigged bone handle. Nickel Silver bolsters. Front bolsters deep-etched U.S. and NORTH. Brass liner.

3-1/8 inches closed. 5-3/8 inches open. Made in USA. "Remington UMC Made in USA" and "R5" tang stamps. Circle "Remington UMC" shield. Stainless Steel blade. Jigged delrin handle. Nickel silver bolsters. Brass liner. With original box and paperwork.

4-1/8 inches closed. 7-3/8 inches open. Made in USA. Front tang Blade 1: x*x*x Case XX *x*x* (Thick Longtail-C, Lightning Bolt-S) ; Front Tang Blade 2: USA 6254 SS. Case XX Script Bomb shield. Stainless Steel blades. Front blade etch: LIMITED XX EDITION 1 OF 3000. Crimson Jig Bone handle. Nickel Silver bolsters. Brass liner.

Fixed Blade Kodiak Hunter Knife. 10-3/4 inches long. Hand Made in USA. "Case XX USA" and "HAND MADE IN U.S.A." tang stamps. Extra tough Van-Kro blade etched with image of kodiak bear. India stag handle with brass safety guard and brass pommel. With original leather sheath and original box.

3-1/2 inches closed. 6 inches open. "SMITH & WESSON", "STEWART A. TAYLOR & SONS", and "CH295" tang stamps. Stainless Steel blades. Main blade etched "Smith & Wesson" with logo. Intricate handle made from bonestag, jigged delrin and steel. Engraved bolsters. 

3-1/8 inches closed. 5 inches open. Made in USA. "CASE XX STAINLESS USA ** " (2 dot) tang stamp. Model # is not on the tang, but it is a pattern. Stainless Steel blades. Imitation ivory handle stamped in green with "1879-1979 Centennial Year" with "City of Bradford Pennsylvania" logo. Brass liner.

3-3/8 inches closed. 5-3/4 inches open. Made in USA. "SCHRADE U.S.A. 34OT" tang stamp. "OLD TIMER" shield. Sawcut Delrin handle. Nickel Silver bolsters. Brass liner. No box.

2-1/2 inches closed. 4-3/8 inches open. Made in USA. "       CASE XX   x  x  " (with lightning bolt S) and "USA 62154W SS" tang stamps. Stainless Steel blades. Red jigged bone handle. Oval long-C "Case XX" shield. Nickel silver bolsters. Brass liner.

3-1/2 inches closed. 6-1/4 inches open. Made in USA. " x x Case XX x x x " (with lightning bolt S) and "611 1/2 L SS" tang stamps.

Collector's Note: Despite the 2005 tang stamp, this knife was shown in the 2006 catalog and described as new for that year.

Oval Script 'Long C' Case XX shield. Stainless Steel blades. Natural Smooth Bone handle with leopard design. Nickel Silver bolsters. Brass liner.

3-3/4 inches closed. 6-3/4 inches open. Made in USA. Front tang: 'CASE XX (10 dots) USA with lighting bolt S , rear tang: '06247PEN '. Stainless Steel blade. Dark Brown Jigged Bone Handle

3 inches closed. 5-3/8 inches open. Made in USA. Front tang: x*x Case XX x*x*x (with longtail C and lightning bolt S) ; Rear tang: USA V610096 SS. Oval CASE XX Script shield. Stainless Steel blade. Vintage Bone handle. Nickel Silver bolsters. Brass liner.

Vintage Fixed Blade Bowie Knife. 10-7/8 inches long. Made in Germany. "6396 HANDMADE", "Original Puma - Bowie", "GENUINE - PUMASTER - STEEL - GERMANY" with PUMA logo etched onto blade. Serial # 73373 etched onto guard. Stag handle. Lanyard hole. With original brown leather sheath with embossed PUMA logo.

Blade etched '6376 Handmade - Original Puma - Bowie - Genuine-Pumaster-Steel-Germany' in gold inlay. 13 inches overall. 8 inch blade. Made in Germany. Pumaster Steel blade. Stag handle. Nickel Silver guard. Original Puma wooden display box and leather sheath

3-7/8 inches closed. 6-5/8 inches open. Made in USA. "CASE TESTED XX" tang stamp. Double oval 'open C' CASE shield. Chrome vanadium blades. Jigged bone handle. Nickel Silver bolsters and liner.

3-1/2 inches closed. 6-1/4 inches open. Made in Germany. Kissing Crane Logo tang stamp. Stainless Steel blade etched with 'Brown Mule', horse & wagon logo, and 'KC 37 Germany'. Walnut handle. Brass liner.

3-Blade Upland Bird Knife. 3-7/8 inches closed. 6-3/4 inches open. Made in USA. 'Remington UMC Made in USA' and 'R-1' tang stamp. Circle Remington UMC shield. Stainless Steel blades. Delrin handle. Nickel Silver bolsters. Brass liner. With original box and paperwork.

Vintage Straight Razor. 5-1/2 inches closed. 9-1/2 inches open. '604 Made in Germany Solingen' and 'Bismarck Razor Works Solingen' tang stamp. White Composite handle. Blade etched 'Bismarck Best German Hollow Ground'. With original box.

Limited edition of 150 made. 3-3/4 inches closed. 6-3/4 inches open. Made in Germany. Front Tang: FIGHT'N ROOSTER (two roosters) SOLINGEN ; Rear Tang: FRANK BUSTER & SON CELEBRATED CUTLERY GERMANY. Oval TENNESSEE State shield. Steel blades. Master Blade etch: 2002 1 of 150 LEBANON WOLLEN MILL SINCE 1908, and # above the tang. Maroon Cracked Ice Celluloid handle. Nickel Silver bolsters. Brass liner.

4-7/8 inches closed. 8-5/8 inches open. Made in USA. "Buck ** 110 ** U.S.A." tang stamp. Stainless Steel blade. Wood handle. Brass bolsters and liner.

3-5/8 inches closed. 6-3/8 inches open. Made in USA. "SCHRADE U.S.A. 896K" tang stamp. Plain Badge shield. Butter & Molasses Celluloid handle. Nickel Silver bolsters. Brass liner.

Limited Edition. 5-3/8 inches closed. 9-1/2 inches open. Made in USA. "CASE XX ***SS** USA" (5 dot with lightning bolt S) and "C51050 SS" tang stamps. Gold Oval Long C "CASE XX" shield. Stainless Steel blade etched "CASE COLLECTORS CLUB 1985" in script with nice scrollwork. Beautiful stag handle. Nickel Silver bolsters; front right bolster etched with serial. Brass liner.

3-3/8 inches closed. 5-7/8 inches open. Made in USA. "CASE XX ****SS**** USA" (8 dot with lightning bolt S) and "62009 1/2 SS" tang stamps. Stainless steel blades. Sawcut delrin handle. Nickel Silver bolsters. "CASE XX" stamped onto front bolster. Brass liner.

Single-Blade Linerlock Knife. 3-3/4 inches closed. 6-1/2 inches open. "CAMILLUS NEY YORK USA" tang stamp. Stainless Steel blade stamped with "BUCKMASTERS" logo. Black handle.

3-1/2 nches closed. 6-1/4 inches open. "FORD - 0102" and FD0034 STAINLESS (c) FORD MOTOR CHINA" tang stamps. Oval Ford logo shield. Red jigged bone handle. Nickel silver bolsters. Brass liner.

3-1/2 inches closed. 6-1/8 inches open. Blade 1 & blade 2 front tangs: (Logo) SOLINGEN; blade 1 rear tang: FRANK BUSTER CUTLERY GERMANY. Black & white Corelon handle. Nickel silver bolsters. Brass liner.

Limited Edition of 10. 4-1/8 inches closed. 7-3/8 inches open. Made in USA. Front Tang Blade 1: x*x* CASE XX x*x*x (Longtail-C, Lightning Bolt-S) ; Front Tang Blade 2: USA 6254 SS. Oval CASE XX Script shield. Stainless Steel blades. Smooth Natural bone handle. Front handle Scrim: illustration of a lighthouse and seagulls, Cape Hatteras Light NC, and Karst 6 of 10. Nickel Silver bolsters. Brass Liner.

4-1/8 inches closed. 7-3/8 inches open. Hen & Rooster logo with "SOLINGEN GERMANY" and "BERTRAM CUTLERY 312 MOP" tang stamps. Mother of Pearl handle with circle Hen & Rooster shield. Nickel Silver bolsters. Brass liner.

3-1/4 inches closed. 5-1/2 inches open. Made in USA. "CASE XX ********** USA" (10 dot with lightning S) and "A6208" tang stamps. Chrome Vanadium blades. Grey/Brown Smooth Appaloosa Bone handle (Case was just starting to experiment with new handle colors in the late 1970's and early 1980's). Nickel Silver bolsters. Brass liner.

2-Blade Senator Pen Knife. 2-3/4 inches closed. 4-1/4 inches open. Made in USA. "VALLEY FORGE CUTLERY CO. NEWARK, N.J. USA" and Circle with "VF" tang stamps. Mother of Pearl handle. Nickel Silver bolsters. Brass liner.

2-7/8 inches closed. 5 inches open. Blade etched 'Spain'. Hen & Rooster logo and '251-MOP' tang stamps. Mother of Pearl handle with Hen & Rooster shield. Nickel Silver bolsters. Brass liner. With original box.

2-Blade Tuxedo Pen Knife. 2-7/8 inches closed. 4-1/2 inches open. Made in USA. 'Remington Made in USA' tang stamp. Stainless Steel blades. Delrin handle. Nickel Silver bolsters. Brass liner. With original box and paperwork.

Limited edition, one of only 1000 produced. 5-1/8 inches closed. 9-1/4 inches open. "A. G. RUSSELL" and "8Cr13MoV China" tang stamps. 8Cr13MoV Stainless Steel blade. Ebony Rucarta handles. Round 2011 Texas Ranger shield. Stainless steel bolsters and liner. With original black leather belt pouch.

3-1/4 inches closed. 5-3/4 inches open. "493" tang stamp. Sawcut Delrin handle. Nickel Silver bolsters etched with Tree Logo and "BOKER TREE BRAND". Brass liner.

Single Blade COAL MINERS' Swing Guard Lockback Knife. 5-3/8 inches closed. 9-1/2 inches open. "STAR HAND CRAFTED" and "3340-C 440 STAINLESS JAPAN" tang stamp. Stainless Steel blades. Jigged Bone handle. With original box and wooden display shelf.

3-7/8 inches closed. 6-3/4 inches open. Made in USA. "CASE XX" and "6347HP" tang stamps. Double Oval 'Open C' CASE shield. Chrome Vanadium blades. Red/Brown Jigged Bone handle. Nickel Silver bolsters and liner.

Solid brass oval belt buckle featuring the long-C "CASE XX" logo. Measures 3-3/8 inches by 1-3/4 inches. Made by Baron Buckle, 1978.

4-7/8 inches closed. 8-5/8 inches open. Made in USA. "Buck 110 (left arrow) USA" tang stamp. Stainless Steel blade. Composite handle.

4-1/8 inches closed. 7-3/8 inches open. Made in USA. Master Blade front tang: x CASE XX x x (long tail C, lightning bolt s). Blade 2 front tang: USA 6254 SS. Etched oval Case XX shield. Stainless Steel blades. Orange Paisley bone handle. Nickel silver bolsters. Brass liner.

This Pen Knife set was the first Case Collector's Club set produced by the company. Comes in a light grey velveteen clam shell case.

1st knife: 1982 92033 B Pen Knife. 2-3/4 inches closed. 4-5/8 inches open. Made in USA. "CASE XX ****SS**** USA" (8 dot with lightning bolt S) and "92033 B" tang stamps. Chrome vanadium blades. Imitation Midnight Pearl handle stamped with Case Collector's Club logo. Nickel Silver bolsters and liner. Front right bolster etched with serial #3793.

2nd knife: 1979 92042 B Swell-Center Pen Knife. 3 inches closed. 4-7/8 inches open. Made in USA. "CASE XX USA * " (1 dot) and "92042 B" tang stamps. Chrome vanadium blades. Imitation Midnight Pearl handle stamped with Case Collector's Club logo. Nickel Silver bolsters and liner. Front right bolster etched with serial #3793.

5-1/4 inches closed. 9-1/4 inches open. Made in USA. " x x x Case XX  x*x* " (with lightning bolt S) and "USA 6165 CV" tang stamps. Chrome vanadium blades. Amber bone handle etched on front "CASE XX" and "U.S.A.". Nickel silver bolsters. Brass liner.

5-1/4 inches closed. 9 inches open. Logo tang stamp. Brown composite handle engraved "OLD HICKORY". Main blade etched with logo and "ONTARIO 611 MADE IN USA".  Nickel Silver bolsters. Brass liner.

Fixed-Blade Knife. 6-5/8 inches long. Made in USA. "SCHRADE U.S.A. SC509" tang stamp. Stainless Steel blade etched "Schrade Scrimshaw". Composition handle depicts image of goose. Nickel Silver bolsters; front bolster etched with serial number. With original box and leather sheath.

3-1/2 inches closed. 6 inches open. Made in China. "STAINLESS CHINA" tang stamp. Stainless Steel blades.

Limited edition. Etched blades. 3-1/4 inches closed. 6-1/4 inches open. Made in USA. CASE XX USA and 4 dots (long-tail C) and 62131 SS tang stamp. Stainless Steel blades. Butternut Bone handle. Nickel Silver bolsters. Brass liner.

3-7/8 inches closed. 7 inches open. Made in Germany. "SWANNER CUT CO." with logo and "Solingen GERMANY" tang stamp. Mother of Pearl handle. Nickel Silver bolsters. Brass liner.

3-3.4 inches closed. 6 inches open. "BULLFROG LAFAYETTE, TN" with frog logo and "440 STAINLESS" tang stamps. Nickel Silver bolsters. Brass liner.

One of a 12 piece series of knives made to celebrate America's Bicentennial. 4 inches closed. 7 inches open. "BOKER U.S.A.", "1774" with tree logo, and serial # "04055" tang stamps. Shield features the Statue of Liberty and reads " 'GIVE ME YOUR TIRED, YOUR POOR, YOUR HUDDLED MASSES YEARNING TO BREATHE FREE' ...E.I."". Brown jigged synthetic handle. Carbon steel blades. Master blade etched "THE MELTING POT". Nickel Silver bolsters. Brass liner.  With original box and paperwork.

4-Blade Congress knife. 3-5/8 inches closed. 5-5/8 inches open. "SOLINGEN GERMANY" under logo and "384-C RPB" tang stamps. Stainless steel blades. Main blade etched "Hen & Rooster 2000 'World's Finest Cutlery in the New Millennium' ". Jigged red bone handle. Circle "MILLENIUM 2000" Hen & Rooster shield. Nickel silver bolsters, brass liner.

Limited Edition. 4-1/8 inches closed. 7-3/8 inches open. Made in USA. "Case XX **** USA " (4 dot with lightning bolt S) and "3254" tang stamps. Single Oval 'Open C' CASE shield. Gold-plated chrome vanadium blades. Master blade etched "JOHN WAYNE 1907-1979" and an image of Wayne. Secondary blade deep-etched with Wayne's signature and an image of a rifle. Yellow Composition handle etched with Wayne's signature. Nickel Silver bolsters. Front bolster etched with serial numbe. Brass liner. With original collector's box.

4-1/8 inches closed. 6-1/2 inches open. "CHIEF BRAND" and "CF0112RD STAINLESS" tang stamps. Smooth red bone handle. Circle Chief shield. Stainless steel bolsters and liner.

Case Centennial mint set of 7 knives. Includes the following knives: CT2131, CT1048, CT254, CT318, CT215, CT225 1/2, and CT220. Made in USA. "CASE XX *SS USA" (1 dot with lightning bolt S) and "'model number' SS" tang stamps. Round "1889 Case xx 1989" shield. Stainless Steel blades etched with serial #. Christmas Tree celluloid handle. Scrolled nickel silver bolsters. Brass liners. With original red folding knife pak.

4-5/8 inches closed. 7-7/8 inches open. Made in USA. Front Tang: 293 [*. 420HC Stainless Steel blade. Front blade etch: BUCK (anvil) USA. Black Nylon handle. Steel liner

3-5/8 inches closed. 6-1/4 inches open. Made in USA. Front Tang Blade 1: CASE XX U.S.A. (Production Year Dots Not Fully Visible) ; Rear Tang Blade 1: 62131. Double Oval 'Open C' Case shield. Chrome Vanadium blades. Brown Jigged Pretty Bone handle. Nickel Silver bolsters. Brass liner.

5-1/2 inches closed. 9-3/4 inches open. Made in USA. "     x  Case XX    x x " (with lightning bolt S) and "USA 610098 SS" tang stamps. Oval Long C Script "Case XX" shield. Stainless Steel blade. Carribean Blue Peachseed Jigged Bone handle. Nickel Silver bolsters. Brass liner.

3-1/8 inches closed. 6-1/8 inches open. Made in USA. " x x CASE XX x x x " (with lightning bolt S) and "USA EX318 SS" tang stamps. No shield. Stainless Steel blades. Exotic Azurite handle with banded mother of pearl and red coral inlays. Nickel Silver bolsters. Brass liner.

5 inches closed. 8-7/8 inches open. Made in USA. " x x*x  Case XX  *x*x*  " (with lightning bolt S) and "USA 6143 SS" tang stamps. Long C script "Case XX" shield. Stainless Steel blade. Jigged goldenrod bone handle. Nickel Silver bolsters. Brass liner.

Single Blade Folding Lockback Knife. 3-5/8 inches closed. 6-1/8 inches open. "PARKER CUT. CO. SURGICAL STEEL - JAPAN" with bird logo tang stamp. Surgical Steel blade etched with "MUSTANG" and the image of a mustang. Christmas Tree handle. Brass bolsters and liner. With original box.

4 inches closed. 7 inches open. Made in USA. "CASE XX U.S.A. * " (1 dot) and "6249 CV" tang stamps. Chrome Vanadium blades. Smooth natural bone handle with nautical scrimshaw design. Nickel Silver bolsters. Brass liner.

Limited Edition of 450. was available exclusively from Mr. Tom Arrowsmith (President and CEO of W.R. Case & Sons Cutlery Company) as he visited Case retail locations throughout America. 4 inches closed. 6-7/8 inches open. Made in USA. "   x*x   CASE XX  x x*x  " and "USA 61265LC SS" tang stamps. Oval Long C "Case XX" shield. Stainless steel blade etched "President's Knife". Smooth Old Red bone handle engraved with Mr. Arrowsmith's signature. Nickel Silver bolsters and liner.

2-3/4 inches closed, 4-5/8 inches open. Made in USA. Master blade front tang: 'Case XX' (thin longtail C, 5 x's 5 dots). Master blade rear tang: 'USA 62132 SS'. Oval shield with 'Case XX'. Stainless steel blades. Beige or natural bone handle. Nickel silver bolsters. Brass liner.

Limited edition of 200. 3-3/4 inches closed. 6-3/4 inches open. Made in Germany. Front Tangs: FIGHT'N ROOSTER (two roosters) SOLINGEN ; Rear Tang: FRANK BUSTER CELEBRATED CUTLERY GERMANY. Plain Gimp shield. Steel blades. Master Blade etch: MERRY (Angel) CHRISTMAS 1989 1 of 200. Teal Fingerprint Celluloid handle. Nickel Silver bolsters. Brass liner.

4-1/4 inches closed. 7-1/2 inches open. Made in China. Rough Rider logo and "CHINA" tang stamps. 440 Stainless Steel blades etched "THE RIFLEMAN SERIES" and "440 razor sharp steel". Brown Crosshatch Jigged Bone handle. Rifle shield. Nickel silver bolsters. Brass liner. With original gift tin.

4-1/8 inches closed. 7-3/8 inches open. Made in USA at the Alabama Knife Factory. 'Parker Edwards Jacksonville, AL' and Eagle tang stamp. 512-Layer Damascus blades. Green Jigged Bone handle. Nickel Silver bolsters. Brass liner. With original box.

Vintage Straight Razor. 6-1/4 inches closed. 9-1/4 inches open. Made in Germany. "Philadelphia Barber Supply Co." and "THE DANDY M.I GERMANY" tang stamps. Yellow Composite handle.

Limited Edition of 300. 3-5/8 inches closed. 6-1/4 inches open. Master Blade Front tang: CASE XX U.S.A. (******) 6 dots ; Master Blade Rear tang: 62131. Double Oval open-C Case shield. Stainless Steel Blades. Master Blade engraving: Gold Bobcat stalking a copper-colored rabbit, in a forest setting, with etch 'SHAW LEIBOWITZ /300' below. Brown Jigged Bone handle. Nickel Silver bolsters. Brass liner.

3-3/4 inches closed. 5-7/8 inches open. Made in Germany. "SIMMONS HARDWARE Co. GERMANY" and "HORNET" under logo tang stamps. Main blade etched "HORNET". Stag handle. Nickel Silver bolsters and brass liner.

5-1/4 inches closed. 9-1/4 inches open. Made in USA. "CASE XX U.S.A." and "5265SAB" tang stamps. Double Oval 'Open C' CASE shield. Chrome Vanadium blades. Stag handle. Nickel Silver bolsters. Brass liner.

4-1/8 inches closed. 7-1/2 inches open. Made in USA. Circle with Bullet "Remington HANDMADE CUTLERY" tang stamp. Special Remington shield. Stainless Steel blades. Jigged bone handle. Nickel Silver bolsters. Brass liner. Includes art print signed by artist, Andy Armstrong and gift tin. New in original retail packaging.

Fixed Blade Knife. 4-1/8 inch blade, 8-1/4 inches overall length. High carbon stainless steel blade. "DHRussell # 3s STAINLESS" and "Grohmann Pictou NS Canada" tang stamps. Rosewood handle. With leather overlap/army sheath.

Custom Handmade Fixed-Blade Knife. 16-1/8 inches long overall. Damascus blade is 11 inches long. Beaded handle. Brass pommel. With brown leather sheath with "GREAT SEAL OF THE STATE OF OKLAHOMA 1907" snap.

3-7/8 inches closed. 6-3/4 inches open. Made in USA. "CASE XX USA  ******   " (6 dot) and "3347HP" tang stamps. Single Oval 'Open C' Case shield. Chrome vanadium blades. Smooth yellow composition handle. Nickel Silver bolsters and liner.

3-1/4 inches closed. 5-3/4 inches open. "494" tang stamp. Sawcut Delrin handle. Nickel Silver bolsters etched with Tree Logo and "BOKER TREE BRAND". Brass liner.

Single-Blade Folding Lockblade Knife. 5-1/4 inches closed. 9-1/4 inches open. Made in USA. "SCHRADE U.S.A. SC500" tang stamp. Stainless Steel blade etched "Schrade Scrimshaw". Whale tooth delrin handle depicts image of 2 fighting rams. Nickel Silver bolsters. Brass liner. With original box, leather sheath, and paperwork.

Original Buffalo Skinner Knife. 14 inches long. Blade is 8-1/4 inches long. Stag handle. Stainless steel blade etched "Original Buffalo Skinner". "EDGE BRAND SOLINGEN GERMANY" and "048" tang stamps. Brass guard. With original leather sheath.

3-3/4 inches closed. 6 inches open. "BUCK CREEK" with Antler logo, "GERMANY STAINLESS", and "OIL THE JOINTS" tang stamps. "BUCK CREEK" badge shield. Nickel Silver bolsters. Brass liner.

8-1/8 inches closed. "RF - ITALY" and "1 of 2001" tang stamps. Stainless Steel blade etched "R.W. LOVELESS DESIGN GERBER U.S.A.". Checkered Canvas Micarta handle. With original box and leather sheath.

2-Blade. 4-1/4 inches closed. 7-3/8 inches open. Made in USA. 'REMINGTON UMC Made in USA' and 'R4353B' and '2005' tang stamp. Bullet shield. Stainless Steel blades. Bone handle. Nickel Silver bolsters. Brass liner. With original box and paperwork.

Limited Edition Knife Set marking the 110th Anniversary of the famous .30-30 Winchester cartridge, which was developed in 1895 as the first smokeless cartridge speccifically designed for big game hunting. Set includes a 10" fixed-blade knife and a single-blade folding lockback knife (3-3/8" closed, 5-3/4" open). Blades etched "WINCHESTER .30-30 LIMITED EDITION 1895 - 2005". Wood handles. Brass guard / bolsters. Includes commemorative medallion and gift tin which measures 11-1/2" X 5-1/2" X 2".

Limited Edition. 4 inches closed. 7 inches open. Made in Germany. 'Boker Solingen Germany' with Tree Logo and "20366" tang stamps. Round Tree Solingen shield and "1976 WISS" shield. Blade stamped "Tree Brand Classic 6066 LTD" with image of buck. Jigged imitation bone handle. Nickel Silver bolsters and liner. No box.

Limited edition. 5 inches closed. 8-5/8 inches open. Made in USA. "KUTMASTER UCC STAINLESS" and "U.S.A." tang stamps. Blade etched "MAC TOOLS Kerry Bernstein 301 Series". Wood handle with brass "Budweiser King" inlay. Brass bolsters etched "MAC TOOLS RACING", Serial #, and "301.70 MPH 3-20-92". Brass liner.

3.6 inches closed. Includes stainless steel liner lock blade (partially serrated), convenient carabiner clip, bottle opener, v-cut wire cutters, phillips and flat hear screw driver bits, and pocket clip.

2-Blade Jack Knife. 3-1/2 inches closed. 6-1/4 inches open. Made in USA. Circle 'Remington UMC Made in USA', Circle 'Remington UMC' and 'R106' tang stamps. Plain federal shield. Stag handle. Engraved Nickel Silver bolsters with serial number. Brass liner. With original box, paperwork, and stainless steel bullet keepsake that reads "75th Remington Cutlery".

Limited Edition of 3000. The knives have the following model numbers/patterns: GR6149 SS and B6149 SS with corresponding tang stamps. Both are 3-7/8" closed, 7" open. "CASE XX **SS* USA" (3 dot with lightning bolt S) date tang stamps. Gold colored embossed raised letter CASE shields. Surgical Steel blades etched with the signatures of Generals Robert E. Lee and Ulysses S. Grant. Confederate gray and Union blue genuine jigged bone handles. Nickel Silver bolsters. Front right bolsters etched with matching long-tail C serial numbers. Brass liners. Includes solid pewter etched medallions of Lee and Grant. With velour-lined presentation case and certificate of authenticity.

0.6 ounces. 5-1/8 inches overall. 2-1/4 inch blade. 1/16 inch thick. Made in USA. Steel blade and full tang handle. Front etch: BUCK USA (Hartsook Logo) ; Rear etch: (flame) BOS S30V 860 ->.

4-7/8 inches closed. 8-5/8 inches open. Made in USA. "Buck 110 U.S.A." and "T" tang stamps. Stainless Steel blade. Wood handle. Brass bolsters.

3-1/2 inches closed. 6-1/8 inches open. Made in USA. Front tang Blade 1: ***** Case XX ***** (10 Dots, Lightning Bolt-S) ; Front Tang Blade 2: USA 10207 SS. Longtail-C CASE XX Middle bolster shield. Stainless Steel blades. Master blade etch: Bird Droppings. Red Pearl Kirinite handle. Nickel Silver bolsters. Brass liner.

Master Blade etched 'CASE TEST RUN 1996'. 3-5/8 inches closed. 6-1/8 inches open. Made in USA. Case XX (longtail C) USA **** (4 dot) and 62131 SS tang stamp. Oval CASE-XX shield. Stainless Steel blades. Jigged Old Red Bone handle. Nickel Silver bolsters. Brass liner.

3-3/8 inches closed. 5-1/4 inches open. Made in Germany. Master blade front tang: (H&R Logo) SOLINGEN GERMANY ; Master blade rear tang: BERTRAM CUTLERY 114DS ; Small blades front tang: (H&R Logo). (H&R Logo) Circle shield. Deer Stag handle. Nickel Silver bolsters. Brass liner.

Richard Petty "THE KING" Limited Edition of 1500 . 5-3/8 inches closed. 9-5/8 inches open. Made in USA. "CASE XX **SS* USA" (3 dot with lightning bolt S) and "CB61050 SS" tang stamps. Oval embossed "CASE xx" shield. Stainless steel blade etched with Petty's profile and signature. Jigged red bone handle. Nickel Silver bolsters. Brass liner.

Fixed Blade Knife. 9-3/8 inches long. Made in USA. "RH 134" with circle logo "REMINGTON UMC MADE IN U.S.A." and "Remington" tang stamps. Stainless Steel blade. Fiber and aluminum handle. Aluminum guard and buttcap. With original leather sheath, box, and paperwork.

3-5/8 inches closed. 6-1/4 inches open. Made in USA. "CASE XX *USA* 81749L SS" (2 dot with lightning bolt S) tang stamp. Stainless Steel blade. Abalone Pearl handle. Nickel Silver bolsters. Front right bolster etched with serial #. Brass liner.

3-7/8 inches closed. 6-1/4 inches open. Made in USA. Front Tang Blade 1: x*x CASE XX x x x (Longtail-C, Lightning Bolt S) ; Rear Tang Blade 1: USA 6355WH SS. CASE Bomb shield. Stainless Steel blades. Front Blade 1 etch: LIMITED XX EDITION 1 OF 3000. Orange Peel Jigged Bone handle. Nickel Silver bolsters. Brass liner.

Single Blade Large Folding Lockback Knife. Shape is similar to a "Coke Bottle" knife. 4-1/4 inches closed. 7-5/8 inches open. "National Blade" and "SURGICAL STEEL JAPAN" tang stamps. Surgical Steel blade etched "STAR OF INDIA" and with an image of the ship. Smooth Bone handle scrimshawed with eagle image. Nickel Silver bolsters. Brass liner.

2-3/4 inches closed. 4-5/8 inches open. Made in USA. "CASE XX ***** SS ***** USA" (10 dot with lightning bolt S) and "52033 R SSP" tang stamps. Stainless Steel blades. Genuine Stag handle. Nickel Silver bolsters. Brass liner.

4 inches closed. 7-1/8 inches open. Made in Germany. Front Tang: SOLINGEN GERMANY. Steel blades. Master Blade etched with FIGHT'N (two roosters) ROOSTER. Black Jigged Delrin handle. Nickel Silver bolster and liner.

3-1/2 inches closed. 6-1/4 inches open. Made in USA. "Case XX USA* 61749L SS" (1 dot with lightning bolt S) tang stamp. Oval 'Closed C' CASE-XX shield. Stainless Steel blade. Chestnut saw bone handle. Nickel Silver bolsters. Brass liner.

This pattern was discontinued then later re-introduced as the small pheasant hunter or small game knife classification. 2.9 ounces. 7-1/8 inches overall. 3-1/4 inch blade. 1/16 inch thick. Made in USA. Front tang: 'CASE XX USA' ; Rear tang: '523 3-1/4 SSP'. Stainless Steel blade. Front blade etch: Illustration of a Pheasant. Genuine Stag handle. Brass guard and butt cap.

3-1/2 inches closed, 6-1/8 inches open. Made in Germany. Front Tang Master blade: (H&R Logo) SOLINGEN GERMANY ; Rear Tang Master blade: BERTRAM CUTLERY 212 DS ; Front Tang Blade 2: (H&R Logo). H&R Logo circle shield. Stainless Steel blades. Genuine Deer Stag handle. Nickel Silver bolsters. Brass liner.

3-5/8 inches closed. 6-1/2 inches open. Made in USA. "        CASE XX    x   " (with lightning bolt S) and "USA 2137 SS" tang stamps. Stainless steel blade stamped "STAINLESS SOD BUSTER JR." in gold color. Smooth Black Composition handle. Brass liner.

4-1/2 inches closed, 7-1/2 inches open. Made in USA. Master blade front tang: 'Case XX' (thick longtail C, plus 5 dots and 5 x's). Secondary blade front tang: 'Tested XX'. Third blade front tang: 'USA 6391 WH SS'. Custom crest shield with initials 'WRC'. Stainless steel blades. Jigged blue bone handles. Nickel silver bolsters. Bolster nearest master blade engraved with the Case 'C' and 'XX' plus unique serial number . Brass liner.

4-3/8 inches closed. 6 inches open. "GERBER" and "PORTLAND, OR 97223 U.S.A." tang stamps. Wood handle with intricate etchings on both sides of handle. The front is etched with a military scene and "Shot heard 'round the world..." The back is etched "American Bicentennial 1776-1976". Brass bolsters and liner. With 5-3/4" x 2-3/4" x 1-1/2" original display box with gold colored image of an eagle and "American Bicentennial 1776-1996".

3-1/2 inches closed. 6-1/8 inches open. Made in USA. "  x*x  Case XX  x x x  " (with lightning bolt S) and "USA T.B.6.52110 SS" tang stamps. Oval 'Long C' Script Case XX shield. Stainless Steel blades. Antique Bonestag handle. Nickel Silver bolsters. Brass liner.

Custom Handmade Fixed-Blade Knife. 15-1/8 inches long. Blue, whilte, and black handle made from multiple materials. Damascus guard and pommel. With brown leather sheath with "GREAT SEAL OF THE STATE OF OKLAHOMA 1907" snaps.

3-5/8 inches closed. 5-7/8 inches open. "FROST CUTLERY" with logo tang stamp. Blade etched with image of Native American on a horse and a buffalo. Smooth appaloosa handle. Nickel Silver bolsters and liner.

Limited Edition of 1500. 4-5/8 inches closed. 8-1/4 inches open. Made in USA. "CASE XX BRADFORD, PA 19 USA 91" (with lightning bolt S), "62100 SS", and "WINSTON CUP CHAMPION" tang stamps. Embossed long-C "Case xx" shield. Stainless steel blades with three-color blade etchings: Jeff Gordon's signature with and the Brickyard 400 logo with a banner that reads "INAUGURAL RACE AUGUST 6, 1994". Red jigged bone handle. Nickel Silver bolsters; front right bolster etched with long-C serial. Brass liner.

3-7/8 inches closed. 7 inches open. Made in USA. "SEARS CRAFTSMAN U.S.A. 95204" tang stamp. Master blade etched with 100 Anniversary SEARS logo. Special "100 SEARS" logo shield. Black textured handle. Nickel silver bolsters. Brass liner. No box.

5 7/8" opened. Stamped 55, Ulster and USA.

Limited Edition 1 of only 2000 made. 3-3/4 inches closed. 6-1/2 inches open. Made in Germany. "A.G. RUSSELL SPRINGDALE, ARK." and "STAINLESS GERMANY" tang stamps. No shield. Brass handle featuring an American Eagle clutching the USA shield on the front and the USA shield and "1776 - 1976" in a furled ribbon on the back.

10-1/2 inches long. Made in Germany. "CARL SCHLIEPER SOLINGEN GERMANY" and Eye Brand logo tang stamps. Stainless steel blade etched "Jim Bowie Reg.U.S.Pat.Office HAND MADE". Stag with stacked leather handle. With original brown leather sheath embossed "Jim Bowie".

Discontinued. Factory etch: 'Benchmade USA' on front with trademark and 'Elishewitz US Pat. Pend.' on back. 4-7/8 inches closed. 8-5/8 inches open. Made in USA. Black ATS-34 Combination Spear Point blade. Anodized Titanium w/ Black Metal Scales. Blue Benchmade box

3-1/4 inches closed. 5-1/8 inches open. Made in Germany. Master blade Front tang: (H&R Logo) SOLINGEN GERMANY ; Master blade Rear tang: Bertram Cutlery 322-SS ; Blade 2 Front tang: (H&R Logo) ROSTFREI. Hen & Rooster circle shield. Stainless steel blades. Master blade etch: Hen & Rooster World's Finest Cutlery. Gold Swirl & Orange Swirl Corelon handles. Nickel Silver bolsters. Brass liner.

Limited Edition of 100. Master Blade Etched with FLORIDA KNIFE COLLECTORS ANNUAL SHOW 1983 1 of 100 (Gold Text).# Etched above the Tang of the Master Blade. 3 inches closed. 5-1/8 inches open. Made in Germany. Front Tang: (2 Roosters logo) SOLINGEN ; Rear Tang: Frank Buster Cutlery Germany. Stainless Steel blade. Mother of Pearl handle. Gold Plated Nickel Silver bolsters. Brass liner.

Single Blade Folding Lockback Knife. Low serial #004 etched onto front bolster. 3-3/4 inches closed. 6-1/2 inches open. "FROST CUTLERY SURGICAL STEEL" with bird logo tang stamp. Handle depicts image of President Kennedy and reads "John F. Kennedy 25th ANNIVERSARY OF AN AMERICAN TRAGEDY 1963-1988". Surgical Steel blade stamped "JAPAN" on back. Nickel Silver bolsters. Brass liner. With original box.

Fixed Blade Hunting Knife. 10-1/2 inches long. Made in USA. "BUCK 119 U.S.A." tang stamp. Black phenolic handle.

2-1/2 inches closed. 4-3/8 inches open. Stainless Steel handle etched "HALF AND HALF". With lanyard hole.

3 inches closed. 5 inches open. Made in Germany. "Barracuda" and "Stainless Rostfrei" tang stamps. Stainless Steel blade etched "CHINA". Plastic handle. With original box.

3-1/4 inches closed. 5-3/8 inches open. Limited Edition. Made in USA. "CASE XX **** SS **** USA" (8 dot with lightning bolt S) and "079" tang stamps. Stainless steel blades. Mother of Pearl handle has a red flame logo and says in black "THE 1982 _ WORLD'S FAIR _ MAY - OCTOBER, 1982 KNOXVILLE, TENNESSEE USA". Nickel Silver bolsters and liner. Left front bolster etched with serial.

Single Blade Guide Lockback Bullet Knife. 5-3/8 inches closed. 9-1/2 inches open. Made in USA. 'Remington UMC Made in USA' and 'R1253 1992' tang stamps. Bullet shield. Stainless Steel blades. Delrin handle. Nickel Silver bolsters. Brass liner. With original box and paperwork.

4-1/4 inches closed. 6-7/8 inches open. Made in USA. Front tang Blade 2: x*x Case XX x x x (Longtail-C, Lightning Bolt-S) ; Front Tang Blade 3: USA 6488 SS ; Front Tang Blade 4: TESTED XX ; Front Tang Blade 1: SS. XX bowtie shield. Stainless steel blades. Brown Jigged Bone handle. Scrolled Nickel Silver bolsters. Brass liner.

Fixed Blade Bowie Knife. 13-1/2 inches long. Made in Germany. Stainless steel blade etched with a buffalo hunting scene on one side and "ORIGINAL LINDER-MESSER SOLINGEN ROSTFREI NO STAIN  INOX  MADE IN GERMANY" and a "REHWAPPEN" logo on the other side. Stag handle. Brass guard. End of handle shaped like an eagle's head. With original brown leather sheath.

Single Blade Folding Lockback Knife. 5 inches closed. 8-1/2 inches open. Made in USA. "CAMILLUS NEW YORK U.S.A."  and "886" tang stamps. Eagle shield. Mother of pearl handles with teal and black composite inlays in a beautiful pattern. One bolster etched with a script "L" with a arrow through it and the other bolster etched with a circular pattern. With original nice wood display box etched with "CAMILLUS" and eagle logo.

Custom Handmade Fixed-Blade Knife. 15-1/4 inches long. Green handle made from multiple materials. Brass guard and pommel. With brown leather sheath with "GREAT SEAL OF THE STATE OF OKLAHOMA 1907" snap.

Fixed Blade Knife. 11-3/4" inches long overall. 6-5/8 inch 440 stainless steel blade etched "Muela JABALI MOLIBDENO VANADIO MADE IN SPAIN". Beautiful olive wood handle. With brown leather sheath.

2-7/8 inches closed. 5-1/8 inches open. Made in USA. Front Tang: CASE XX x x (longtail C with lightning bolt S) ; Rear Tang: USA 610096 CV. Oval CASE XX Script shield. Chrome Vanadium blades. Red Appaloosa Jig Bone handle. Nickel Silver bolsters. Brass liner.

Limited edition issued to commemorate the Tennessee Walking Horse. The blades of the knife are fancy laser-etched and hand-enameled. 4-1/8 inches closed. 7-3/8 inches open. Made in USA. CASE XX 5 x 3 * (long-tail C) and USA 6254 SS tang stamp. Script logo shield. Stainless Steel blades. Jigged Burnt Oatmeal Bone handle. Nickel Silver bolsters. Brass liner.

Fixed Blade Bowie Knife. 15-1/2 inches long. Made in Pakistan. "FROST CUTLERY" with bird logo tang stamps. "PAKISTAN" etched onto blade. Multi-color wood handle. With original box and black leather sheath.

3 inches closed. 4-3/4 inches open. Made in USA. 'Case XX ***SS** USA' (with lightning bolt S) and '62042 SS' tang stamp. Oval 'Open C' Case shield. TruSharp Surgical Steel blades. Delrin handle. Nickel Silver bolsters. Brass liner.

4 inches closed. 7-1/8 inches open. Made in USA. "SCHRADE U.S.A. SC505" tang stamp. High Carbon Steel blades. Whale tooth delrin handle depicts seagulls and a lighthouse. Nickel Silver bolsters. Brass liner. With original box and paperwork.

3 inches closed. 5-3/8 inches open. Made in Germany. Fight'n Rooster logo with "SOLINGEN" and "FRANK BUSTER CUT CO. GERMANY" tang stamps. Master blade etched "THE CAPTAIN'S Rooster" with some scrollwork in gold. Mother of Pearl handle. Nickel Silver bolsters. Brass liner.

4-1/8 inches closed. 6-3/4 inches open. Made in USA. "CASE XX U.S.A. ****** " (6 dot) and "6488" tang stamps. The CASE XX tang stamp appears on both blade 1 and blade 3. Double Oval 'Open C' CASE shield. Chrome Vanadium blades. Jigged Bone handle. Nickel Silver bolsters. Brass liner.

Nice 4-Blade Utility Knife made for the military. 3-5/8 inches closed. 6-3/8 inches open. Made in USA. "CAMILLUS 1980" tang stamp. Stainless steel construction. Bail on left end.

2-Blade. 3-1/2 inches closed. 6-1/4 inches open. 'Crown Q' and '1999' tang stamp. Raised Letter Embossed shield. SS blades. Green Bone handle. Nickel Silver bolsters. Brass liner. With original box.

4-1/8 inches closed. 7-3/8 inches open. "STAINLESS CHINA" tang stamp. Oval "WINCHESTER" shield. Stainless steel blades. Master blade etched "WINCHESTER". Jigged imitation bone handle. Nickel Silver bolsters. Brass liner.

3-Blade Stockman Knife. 4 inches closed. 7 inches open. Made in England. "JOSEPH RODGERS" with star and cross logo and "SHEFFIELD ENGLAND" tang stamps. Plain crest shield. Master blade etched "STOCKMAN'S FRIEND" with star and cross logo. Jigged Bone handle. Nickel Silver bolsters. Brass liner.

4 inches closed. 7-1/8 inches open. 8Cr13MoV Stainless Steel blade etched "CARSON DESIGN M16-01S" and "CRKT" with logo. 2Cr13 Stainless Steel handle. With pocket clip, dual thumb studs, and flipper for easy opening.

Limited Edition 1 of 600. 3-3/8 inches closed. 5-7/8 inches open. "Burnt Chimney" with Logo and "Solingen Germany Stainless" tang stamps. Round NKCA shield. Stainless Steel blades. Green Jigged Bone handle. Nickel Silver bolsters. Front bolster etched with 'Burnt Chimney' and Logo. Brass liner. With original box.

4 inches closed. 7 inches open. Made in Germany. Front Tang Master Blade : 'Solingen, Germany' with logo ; Master blade rear tang: 'Bertram Cutlery 313-AP' ; Front Tang Blade 2 & 3: 'Rostfrei' with logo. H&R Logo Circle shield. Stainless steel blades. Front blade etch: (H&R Logo) Hen & Rooster 'World's Finest Cutlery'. Antique Pumpkinseed Jigged Bone handle. Nickel Silver bolsters. Brass liner.

Limited edition. 3-1/4 inches closed. 5-5/8 inches open. Made in USA. "CASE BRADFORD, PA 19 USA 93", "CASE XX TESTED" in oval, "W.R. CASE  & SONS BRADFORD, PA", and "TESTED XX 73109X" tang stamps. Double oval 'Closed C' CASE shield. Glitter stripe celluloid handle. Chrome vanadium blades; master blade etched "CASE BRADFORD, PA". Red Bone handle. Nickel Silver bolsters. Brass liner. With original box and certificate of authenticity.

3 11/16"closed, 6 3/4" open. Nickel silver bolsters and shield. Brass pins and liners. Housed in special display box.

2-Blade Limited Edition Lumberjack Bullet Knife. Limited Edition 1 of only 2000 made. 3-5/8 inches closed. 6-1/4 inches open. Made in USA. 'Remington UMC Made in USA', 'R4468', and '1997' tang stamps. Bullet shield. Stainless Steel blades etched "Remington TRADEMARK" and "LW Duke 1 of 2000". Imitation Cocobolo handle. Nickel Silver bolsters. Brass liner. With original box and paperwork.

4-1/8 inches closed. 7-3/16 inches open. "(c) FM" tang stamp. Stainless Steel blade etched with some scroll work and "COLT 1911 AUTOMATIC". Micarta inlays on handle feature a 3D gun emblem on front and Franklin Mint shield on back.

Made in Japan. 6-1/4 inch blade length. 10-3/4 inches overall. Gun-blued SK-5 blade etched "VIETNAM 5th SPECIAL FORCES GROUP" and with SOG logo. "SEKI - JAPAN" tang stamp. Stacked leather handle. Black leather sheath with sharpening stone.

5 inches closed. 8-1/4 inches open. Made in China. 'Frost USA' and 'China' tang stamps. With original box.

3-5/8 inches closed. 6-5/8 inches open. Made in USA. "W.R. Case & Sons Bradford, PA 19 USA 96" and "TESTED XX 62085" tang stamps. Bomb-shaped 'Closed C' CASE shield. Chrome vanadium blades. Master blade etched "PHYYSICIAN'S KNIFE". Red Rogers Jigged Bone handle. Nickel Silver bolsters. Brass liner.

2-3/4 inches closed. 4-5/8 inches open. Made in USA. "Buck U.S.A." with anvil symbol tang stamp. Stainless Steel blade and handle. Comes with Commemorative Pin.

17.6 ounces.. 14 inches overall. 9 inch blade. Made in USA. Front stamp: 'Bark River Knives Escanaba MI 154CM' ; rear tang: 'First Production Run'. 154CM Steel blade. Desert Ironwood #3 handle. Original Bark River Knives box and leather sheath

3-1/2 inches closed. 6-1/4 inches open. Made in Germany. "Kissing Crane" over logo over "ROSTFREI" tang stamp. Stainless Steel blade stamped with "BLACK ANGUS KC43 GERMANY" and an image of a cow.

3-3/4 inches closed. 6-1/2 inches open. Made in Germany. Front Tang Blade 1: H&R Logo SOLINGEN GERMANY ; Rear Tang Blade 1: BERTRAM CUTLERY 143 DS ; Rear Tang Blade 2; H&R Logo ; Rear Tang Blade 3: H&R Logo. Hen & Rooster Circle Shield. Stainless Steel blades. Stag handle. Nickel Silver bolsters. Nickel Silver liner.

3 inches closed, 5-1/4 inches open. Made in USA. Master blade front tang: 'Case XX' (thin longtail C, 5 x's, 0 dots). Secondary blade front tang: 'USA 610096 SS'. Oval shield with 'CASE XX' script logo. Stainless steel blades. Rattlesnake skin pattern natural bone handle. Fancy Scrolled Nickel silver bolsters. Brass liner.

3-1/2 inches closed. 6-1/4 inches open. Made in USA. Front Tang Blade 1: CASE XX STAINLESS USA * (1 dot, block letters) ; Front Tang Blade 2: 5207 SP SSP. Stainless Steel blades. Front Blade 1 etch: 1879 BRADFORD CENTENNIAL 1979. Genuine Stag handle. Nickel Silver bolsters. Brass liner.

5-1/4 inches closed. 9-1/4 inches open. Made in USA. Front Tang: CASE XX USA ******* (7 dot, Block Letter) ; Rear Tang: 6165 SAB. Double Oval Open-C CASE shield. Chrome Vanadium blade. Brown Jigged Pakkawood handle. Nickel Silver bolsters. Brass liner.

No production number is stamped, similar to the 283 DS pattern. 3-1/2 inches closed. 6 inches open. Made in Germany. Front Tang Blade 1: (H&R Logo) SOLINGEN GERMANY ; Front Tang Blade 2 & 3: (H&R Logo) STAINLESS. Hen & Rooster Circle Shield. Stainless Steel blades. Genuine Stag handle. Nickel Silver bolsters. Brass liner.

4-1/2 inches closed. 7-3/4 inches open. Made in Germany. Master blade front tang: H&R logo plus Solingen Germany. Master blade rear tang: Bertram Cutlery Rostrei 293DS. Other blades front tangs: H&R logo plus Stainless. Round H&R shield with 'Millennium 2000'. Stainless steel blades. Master blade etch: horse and rider image plus text 'Master Quarter Horse'. Secondary blade etch: decorative bar with Hen & Rooster 1999 plus H&R logo. Deer stag handle. Nickel silver bolsters. Brass liner.

3-1/8 inches closed. 5-3/8 inches open. Made in USA. "CASE XX U.S.A." and "62109X" tang stamps. Double oval 'Open C' CASE shield. Chrome vanadium blades. Jigged red/brown bone handle. Nickel Silver bolsters and liner.

4-1/8 inches closed. 7-3/8 inches open. Made in USA. "     Case XX    x   " (with lightning bolt S) and "USA 6254 SS" tang stamps. Stainless Steel blades; main blade etched with silhouette of John Wayne. Smooth natural bone handles laser-etched "THE DUKE". Nickel Silver bolsters. Brass liner.

Single Blade Tiny Toothpick Knife. 3 inches closed. 5-1/4 inches open. Rough Rider logo and "440 razor sharp steel"  tang stamps. 440 Stainless Steel blade etched with Rough Rider logo and "ALWAYS READY!" on front and "CHINA" on back. White Pearl handle. Oval multi-color pearl shield. Nickel silver bolsters. Brass liner.

2-3/4 inches closed. 4-7/8 inches open. Made in USA. Front Tang Master Blade: x x x CASE XX x*x* (Longtail-C, Lightning Bolt-S) ; Rear Tang Master Blade: USA 8220 RSC SS. Stainless Steel blades. Genuine Abalone handle. Nickel Silver bolsters. Front Right Facing etch: CASE-XX. Nickel Silver Liner.

3-3/4 inches closed. 7 inches open. Made in USA. 'Schrade / U.S.A. / 1940T' tang stamp. Bone handle. Nickel Silver bolsters. Brass liner. With original box and paperwork.

Limited Edition of 880. 4-1/8 inches closed. 7-3/8 inches open. Made in USA. "Kinfolks *USA* " , "USA 6354W SS", and "SS" tang stamps. Circle NKCA shield. Stainless Steel blades. Master blade stamped "2006 NKCA CLUB KNIFE 1 OF 880".  Jigged Bone handle. Nickel Silver bolsters. Brass liner.

4 inches closed. 7 inches open. Made in Germany. 'BOKER U.S.A.' and '70485' tang stamps. Raised Letter Embossed shield. High-Carbon Alloy Steel blades, master blade etched 'TREE BRAND'. Delrin Stag handle. Nickel Silver bolsters. Brass liner. With original box and paperwork.

3 inches closed. 5-1/4 inches open. Made in USA. "  x  x*x  Case XX  *x*x*  " (with lightning bolt S) and "USA 610096 SS" tang stamps. Stainless Steel blade. Beautiful periwinkle jigged bone handles. Plain cross-shaped shield. Nickel silver bolsters and brass liners.

Limited Edition #065. 3-3/8 inches closed. 5-1/4 inches open. Made in USA. "KA-BAR OLEAN, N.Y." and "065" tang stamps. 14kt Gold KA-BAR Dog's Head shield. Stainless Steel blades. Jigged Bone handle. Nickel Silver bolsters. Brass liner.

3-3/4 inches closed. 6-3/8 inches open. Made in USA. "Case XX USA * " (with lightning bolt S) and "640045R" tang stamps. Single Oval 'Open C' Case shield. Stainless Steel blades. Composite handle. Nickel Silver bolsters. Brass liner.

Limited Edition of 300. This is the 5th in the Big Bucks of North America Series featuring the Pronghorn Deer. 4-7/8 inches closed. 8-1/2 inches closed. Made in USA. Front Tang: BUCK 110 -| U.S.A. Stainless Steel blade. Front blade etch: 24kt Gold etch illustration of Pronghorns in the wild, Limited Edition 2004 139 of 300. Chrysocolla, Red Jasper, White Oak, Red Oak, Mahogany, Walnut, Cedar, Limba, and Pine handle. Brass bolsters and liner.

5 inches closed. 8-1/2 inches open. Made in USA. "SCHRADE+ USA 6OT" tang stamp. "OLD TIMER" brass bar shield. Sawcut Delrin handle. Brass bolsters and liner. With lanyard and embossed leather sheath.

3-1/2 inches closed, 6 inches open. Made in Germany. Master blade front tang: H&R logo plus 'Solingen Germany'. Master blade rear tang: 'Bertram Cutlery 323DS'. Secondary blades front tangs: H&R logo plus 'Rostfrei'. Round shield with Hen & Rooster logo. Stainless steel blades. Front Master blade etch: (H&R Logo) Hen & Rooster World's Finest Cutlery. Genuine Deer Stag handle. Nickel silver bolsters. Brass liner.

2-5/8 inches closed. 4-5/8 inches open. Made in USA. "Case XX USA **** " (Long C script; 4 dot with lightning bolt S) and "6333 SS" tang stamps. Double oval 'Open C' CASE shield. Stainless Steel blades. Butternut Rogers jigged Bone handle. Nickel Silver bolsters. Brass liner.

2-Blade Copperhead Knife. 3-3/4 inches closed. 6-1/2 inches open. Made in Germany. Kissing Crane logo over "GERMANY", "25", and logo over "ROBT KLAAS SOLINGEN GERMANY" tang stamps. Red Kissing Crane badge shield. Stag handle. Nickel Silver bolsters. Brass liner.

3-5/8 inches closed. 6-1/4 inches open. Made in USA. Front Tang Master Blade: x x x CASE XX x*x* (5Xs, 2Dots, Longtail-C, Lightning Bolt S) ; Front Tang Blade 2: USA 62131 CV. Oval CASE XX Script shield. Chrome Vanadium blades. Master blade etch: illustration of a manned canoe. Amber Jig Bone handle. Nickel Silver bolsters. Brass liner.

3-1/2 inches closed. 6-1/8 inches open. "BUCK 382 (symbol for 2008)" and "CHINA" tang stamps. Hammer & Blade shield.  Stag handle. Nickel silver bolsters and brass liner.

Long-pull master blade gold-scroll etched 'Tennessee State Trooper 1992 1 of 300' with image of state. 3-3/4 inches closed. 6-3/4 inches open. Made in Germany. Mark tang: Fight'n Rooster and Roosters icon and Solingen ; Rear tang: Frank Buster Celebrated Cutlery Germany. Silver State Trooper shield. Surgical Steel blades. Cracked Ice handle. Nickel Silver bolsters. Brass liner.

3-3/4 inches closed. 6-1/2 inches open. Made in USA. Master Blade Front Tang: x*x* Case XX x*x*x (Longtail-C, lightning bolt S); Blade 2 front tang: USA VTB6339 SS. Oval Case XX Script shield. Stainless Steel blades. Vintage Bone handle. Nickel Silver bolsters. Brass liner.

Limited Edition. 3 inches closed. 5-1/4 inches open. Made in USA. "  x*x*x  Case XX  *x*x*  " (with lightning bolt S) and "USA 610096 SS" tang stamps. Stainless Steel blade etched with serial . Beautiful old red smooth bone handles. Plain cross-shaped shield. Intricately scrolled nickel Silver bolsters and brass liners.

Fixed Blade USMC Fighting Knife. 12 inches long. Made in USA. 'Ka-Bar Olean, N.Y." and 'USMC' tang stamp. Hi-Carbon USSI 1095 Steel coated with black epoxy to prevent light reflection and protect the carbon steel. Blade imprinted '100 Years 1898-1998 Union Razor Co. KA-BAR Union Cutlery Co.' Stacked Leather handle. With original box, leather sheath, and paperwork.

3-1/8 inches closed. 4-7/8 inches open. Made in USA. "CASE XX STAINLESS USA **  " (2 dot) and "06263 SSP" tang stamps. Oval Open-C "CASE" shield. Stainless Steel blades. Master blade etched with 'Tested XX Razor Edge'. Brown Delrin Jigged handle. Nickel Silver bolsters and liner.

Fixed Blade Bowie Hunting Knife. 10-1/4 inches closed. "RG37 ROSTFREI ITALY" tang stamp. Stainless Steel blade deep-etched "Rigid". Stag handle. Brass guard and pommel. With original leather sheath embossed with "R" logo.

3-Blade Whittler Knife. 4 inches closed. 6-7/8 inches open. Made in Germany. Kissing Crane Logo and "ROBI KLAAS SOLINGEN" tang stamp on front of master blade. "3135XVIII" tang stamp on back of master blade. Larger Kissing Crane Logo tang stamp on secondary blade and Small Kissing Crane Logo with "GERMANY" tang stamp on other secondary blade. Master blade etched "UNRIVALED QUALITY ORIGINAL SOLINGEN" with Kissing Crane Logo. Federal Shield with Red Kissing Crane Logo shield. Stag handle. Nickel Silver bolsters. Brass liner.

Limited Edition. 4 inches closed. 7 inches open. "Winchester 567" and "Germany" tang stamps. Plain Badge shields. Stainless Steel Blades. Master blades etched with "Kentuckian" and "Tennessean". Jigged Bone handles. Nickel Silver bolsters. Brass liners. Includes original display case which measures 11" X 5" X 1".

4-7/8 inches closed. 8 inches open. Made in China. 440 Stainless Steel blade etched "FROST CUTLERY 440 STAINLESS". With black sheath embroidered "FROST".

3-1/2 inches closed. 6-1/4 inches open. Made in USA. Q Queen Logo tang stamp. Embossed Q Queen Logo shield. Stainless Steel blades. Main blade inscribed with Queen logo, '#9140' and 'Stainless'. Delrin handle. Nickel Silver bolsters. Brass liner.

4-1/8 inches closed. 7-1/8 inches open. Made in USA. Stainless Steel Partially Serrated blade. Front blade etch: BUCK 175 ] U.S.A. Anodized Aluminum handle.

Limited edition with unique serial number engraved on front right bolster. 3-5/8 inches closed. 6-1/4 inches open. Made in USA. CASE XX *SS USA and CT2131 SS tang stamps. Special round centennial 1889-1989 CASE XX shield. Stainless Steel blades. Main blade etched GIVE EM HELL JOHN! 1 of 300 with image of Wayne and a flag. Secondary blade etched with Wayne's signature. Christmas Tree Celluloid handle. Nickel Silver bolsters. Front left bolster etched with outline of Wayne, front right bolster etched with unique serial number. Brass liner.

Limited edition of 1500. Etched and hand enameled blades. 3-1/2 inches closed. 6-1/8 inches open. Made in USA. Case XX * SS USA (lightning S) and 52131 SS tang stamp. Stainless Steel blades. Thick Stag handle. Nickel Silver bolsters. Brass liner. In original commemorative velvet-lined display box

Knife weighs 3.9 ounces. 5.4 ounces. 2-3/4 inches blade length. 6-1/2 inches total length. Made in USA. Front tang: '196' plus symbol for 2004. Rear tang: 'BOS ATS-34 U.S.A.'. Stainless steel blade. Blade engraved "Buck USA'. Blade etch: 'Last Production Year - El Cajon, CA'. Wood handle.

3-3/4 inches closed. 6-3/4 inches open. Made in Germany. 'CRISNER INDIANHEAD' and 'INDIANHEAD' tang stamp. SS blades, master blade etched 'INDIAN HEAD Hand Made in Germany'. Nickel Silver bolsters. Brass liner.

5-1/4 inches closed. 9-1/4 inches open. Made in USA. "CASE XX * USA ** 3165 1/2 SS" (3 dot with lightning bolt S) tang stamp. Double Oval 'Open C' CASE shield. Stainless steel blade. Yellow composition handle etched with buffalo image. Nickel silver bolsters. Brass liner.

3-1/4 inches closed. 5-3/8 inches open. Made in USA. "  x x x  Case XX   x x*  " (with lightning bolt S) and "USA 8208 SS" tang stamps. Stainless Steel blades. Mother of Pearl handle. Nickel Silver bolsters and liner.

2-Blade Jack knife. Made in Pakistan. Limited edition #771. 3-7/8 inches closed and 6-3/4 inches open. Stainless steel blades. Tang stamps read "Frost Cutlery" with company logo and "SOLINGEN STEEL". Nickel silver bolsters; front right bolster etched with serial #771. Smooth white composition handles with red text"Coca-Cola" logo. Brass liners. With clam shell case and collector's cardboard "Coke Cap" (8 of 40).

Limited Edition #. 5 inches closed. 8-7/8 inches open. Made in USA. Front Tang: Case 75c 19 USA 94 ; Rear Tang: TESTED XX 51095. Oval Open -C CASE Bomb shield. Steel blade. Genuine Stag handle. Nickel Silver bolsters. Front right-facing bolster etched with Longtail-C and unique serial number #. Brass liner.

3-Blade Quarter Horse Sowbelly Stockman Knife. 3-7/8 inches closed. 6-5/8 inches open. Made in Germany. Hen & Rooster Logo "Solingen Germany", Hen & Rooster logo "STAINLESS", and "Bertram Cutlery Rostfrei 213DS" tang stamps. Circle Hen & Rooster shield. Stainless Steel blades. Master blade etched "QUARTER HORSE" and with an image of a cowboy. Secondary blade etched "HEN ROOSTER 1993". Stag handle. Nickel Silver bolsters. Brass liner.

Limited Edition #127. 3-1/2 inches closed. 6 inches open. Made in USA. "KA-BAR OLEAN, N.Y." and "127" tang stamps. 14kt Gold KA-BAR Dog's Head shield. Stainless Steel blades. Jigged Bone handle. Nickel Silver bolsters. Brass liner.

Single Blade Grandaddy Barlow. 5 inches closed. 9 inches open. Made in USA. 'Remington Madison NS USA' tang stamp. Bullet shield. Stainless Steel blade with etched Remington logo. Delrin handle. Nickel Silver bolsters. Brass liner. With original box and paperwork.

2-Blade Folding Crown Pen Knife. 2-3/8 inches closed. 4-1/4 inches open. Bridge logo over "MANN", "GERMANY", and "E. BRUCKMANN GERMANY" tang stamps. Mother of Pearl handle.

3-5/8 inches closed. 6-1/4 inches open. "GERBER 500" and "PORTLAND, OR USA" tang stamps. Stainless steel blade stamped with "BUCKMASTERS" logo. Textured olive green handle.

Single Blade Baby Bullet Lockback Knife. 3-5/8 inches closed. 6-3/8 inches open. Made in USA. 'Remington UMC Made in USA' and 'R11734L' and '1984' tang stamp. Bullet shield. Stainless Steel blades. Delrin handle. Brass liner. With original box and paperwork.

4-1/8 inches closed. 7-3/8 inches open. Made in USA. 'Case XX * USA' (with lightning bold S) and '3254' tang stamp. Raised Letter Long C CASE (1987-1989) shield. Mirror-Finish CV Steel blades. Yellow Composition handle. Nickel Silver bolsters. Brass liner.

2-Blade Jack knife. Made in Pakistan. 3-7/8 inches closed and 6-3/4 inches open. Stainless steel blades. Tang stamps read "Frost Cutlery" with company logo and "SOLINGEN STEEL". Nickel silver bolsters; front right bolster etched with serial #771. Smooth white composition handles with red text"Coca-Cola" logo. Brass liners. With clam shell case and collector's cardboard "Coke Cap" (3 of 8).

Custom Handmade Fixed-Blade Knife. 15-1/2 inches long overall. Blade is 10-1/4 inches long. Handle made from multiple materials including bone and stacked leather. Brass guard and pommel. With brown leather sheath with "GREAT SEAL OF THE STATE OF OKLAHOMA 1907" snap.

2-Blade Bullet Trapper Knife.  Serial #18302. Made to commemorate and celebrate the opening of the new Remington headquarters in Madison, N.C. USA. 4-1/2 inches closed. 8 inches open. Made in USA. 'Remington Madison N.C. USA' tang stamp. Bullet shield. New tang stamp green inlay shield. High Carbon 0170-6C Steel blades. Custom etching on blade: "Madison, North Carolina U.S.A. FIRST PRODUCTION RUN". Jigged Delrin handle. Nickel Silver bolsters. Steel liner. With original box.

Fixed Blade Knife. 8 inches long. Made in USA. Block Letter "CASE" tang stamp. Stacked Leather handle.

4-1/2 inches closed, 7-7/8 inches open. "STAINLESS" and "CHINA" tang stamps. Stainless steel blade. Scrolled bolsters. Yellow composition handles stamped with images of 4 Confederate Generals and the Confederate flag. Comes in a wooden display case with a molded flocked insert and a full color photo.

4 inches closed. 7 inches open. Made in USA. " x x  CASE XX  x x x " (with lightning bolt S) and "USA 61011 SS" tang stamps. Single oval 'Open C' Case shield. Stainless steel  blades. Brown jigged delrin handle. Nickel Silver bolsters and liner.

Master blade etched 'CASE XX'. Limited Edition with serial number on front right bolster. 4-3/8 inches closed. 7-5/8 inches open. Made in USA. Blade 1 front tang: CASE 19 XX 98; blade 1 rear tang: TESTED XX 5340; blades 2 & 3 rear tang: CASE XX BRADFORD, PA USA. Stag handle. Nickel silver bolsters. Brass liner.

Lockblade. 4-3/8 inches closed. 7-1/2 inches open. Made in Germany. 'BOKER Solingen' and 'GERMANY STAINLESS' tang stamp. SS blade. Titanium handle. With original display box and paperwork.

1989 Fixed Blade 1836 Stag Bowie Knife made to celebrate the 175th anniversary of the Star-Spangled Banner. In wooden music box that plays the Star-Spangled Banner. Case 100th Anniversary Limited Edition of only 1500. 14-1/4 inches long. Made in USA.  Blade etched in black with beautiful images of Ft. McHenry and an American flag. Blade reads "Oh say does that Start Spangled Banner yet wave...", "175th Anniversary 1814 - 1989", and " Francis Scott Key 1814 Ft. McHenry". "CASE XX *SS USA 1836" (1 dot with lightning bolt S), and long C XX logo with serial number. Genuine Stag Horn handle. Brass finger guard and butt cap. Comes inside a wooden music box and with COA. The music box measures 16-1/2 inches wide by 7-1/2 inches deep by 2-3/4 inches tall and features a brass nameplate that reads "100th Anniversary Case XX 1889 - 1989 STAR SPANGLED BANNER Celebrating America's History 1 of 1500". 
Must be in the Original Wood Display Box with hidden music box that plays the Star Spangled Banner - 14 1/8 inches overall.

3-3/4 inches closed. 6-5/8 inches open. Made in Germany. Master Blade Tang 1: (H&R Logo) SOLINGEN GERMANY ; Master Blade Rear Tang: BERTRAM CUTLERY ROSTFREI 213DS ; Front Tang Blade 2 & 3: (H&R Logo) ROSTFREI. Circle Hen & Rooster shield. Stainless Steel blades. Master Blade Etch: QUARTER HORSE (Cowboy, on a Horse, Roping a Bull). Front Blade Etch: HEN (H&R LOGO) 1990 ROOSTER. Genuine stag handle. Nickel Silver bolsters. Brass liner.

Made in USA by Queen Cutlery. Keystone Series XVII. 4-7/8 inches closed. 8-3/4 inches open. "S X M TITUSVILLE PA." and QUEEN CUT. CO. TITUSVILLE, PA" tang stamps. Blade etched "Schatt & Morgan 1 of 600" and "2007 042 X 171 XVII". Red jigged bone handle. Nickel Silver bolsters engraved "S & M" on front. Brass liner. With original box.

3-3/4 inches closed, 6-1/2 inches open. Made in USA. Master blade front tang: 'Case XX' (thin longtail C, 5 x's, 4 dots). Secondary blade front tang: 'USA T.B.6339 SS'. Oval shield with 'CASE XX' script logo. Stainless steel blades. Wavy jigged blue/gray bone handle. Nickel silver bolsters. Brass liner.

4 inches closed. 7-1/8 inches open. Made in Germany. Front Tangs: (H&R Logo) SOLINGEN GERMANY ; Rear Tang Blade 1: BERTRAM CUTLERY 313 DS/TW. Blade 2&3 Front Tangs: (H&R Logo) ROSTFREI. Tennessee Walking Horse Circle shield. Stainless Steel blades. Front blade 1 etch: Tennessee Walking Horse. Genuine Stag handle. Nickel Silver bolsters. Brass liner.

3-Blade Cuttin Horse Sowbelly Stockman Knife. 3-7/8 inches closed. 6-5/8 inches open. Made in Germany. Hen & Rooster Logo 'Solingen Germany' and 'Bertram Cutlery Rostfrei 213DS' tang stamps. Circle Hen & Rooster shield. Stainless Steel blades. Stag handle. Nickel Silver bolsters. Brass liner.

Limited Edition. 5-1/4 inches closed. 9-1/2 inches open. Made in USA. "CASE XX *****SS**** USA" (9 dot with lightning bolt S) and "6151" tang stamps. Double oval open C "CASE" shield. Stainless Steel blade etched with "1st EDITION CASE COLLECTORS CLUB 1981". Jigged bone handle. Nickel Silver bolsters; front right bolster etched with serial #. Brass liner. Comes with wooden wall plaque and certificate of authenticity (attached to back of plaque).

4 inches closed. 6-5/8 inches open. Made in USA. Queen Steel. "QUEEN CUT. CO. TITUSVILLE, PA.", "S X M TITUSVILLE, PA.", and "SCHATT & MORGAN" tang stamps. Plain shield. Stainless Steel blades. Master blade etched "Schatt & Morgan 1 of 100". Secondary blade etched "024431 2008". Stag handle. Nickel Silver bolsters. Front bolsters deep-etched "S & M". Brass liner.

GERBER Knife Sharpening Steel w/ attatched leather sheath. 8-3/4 inches long. "GERBER" tang stamp. Leather sheath reads "GERBER PORTLAND, ORE. 97223 U.S.A. 

3-1/8 inches closed. 5-3/8 inches open. Made in USA. "Case XX Bradford, PA 19 USA 93" and "DR62109X SS" tang stamps. Double oval 'Open C' CASE shield. Stainless Steel blades. Jigged dark red bone handle. Nickel Silver bolsters. Brass liner.

3-3/8 inches closed. 5-7/8 inches open. Made in Germany. "FIGHT'N ROOSTER" over logo over "SOLINGEN" and "FRANK BUSTER & SON CELEBRATED CUTLERY GERMANY" tang stamps. Master blade etched  with "FIGHT'N ROOSTER TM" and logo. Stag handle. Plain federal shield. Nickel Silver bolsters. Brass liner.

Master blade etch: Duck head image 'DUCKS UNLIMITED'. 3 inches closed. 5-1/4 inches open. Made in USA. Master blade front tang: 'CASE XX BRADFORD, PA. 19 USA 90 DU1225LSS' (lightning bolt S). Circle (Duck head) shield. Stainless Steel blades. Green Synthetic handle.

4-3/8 inches closed. 8 inches open. Made in Germany. "ROB. KLAAS SOLINGEN GERMANY" with Kissing Crane logo and "COMMEMORATIVE STAINLESS" with star logo tang stamps. Oval shield etched with "1014" serial number. Stainless Steel blade etched with "Bicentennial Commemorative MAKING OF THE FLAG 1776 Limited Edition of 3000". Jigged handle. Nickel Silver bolsters. Brass liner.

3-3/8 inches closed. 5-7/8 inches open. "COLONIAL PROV. U.S.A." and "PATENT 3,317,996" tang stamps. Cream-colored composite handle stamped with image of Elvis Presley and "ELVIS PRESLEY King of Rock 'n' Roll 1935  1977". Nickel Silver bolsters deep etched "Barlow". Brass liner.

4-1/4 inches closed. 7-1/2 inches open. Made in USA. Circle "Remington UMC Made in USA" and "R-2" tang stamps. Round "REMINGTON UMC" shield. Stainless Steel blades. Brown jigged imitation bone handle. Nickel Silver bolsters. Brass liner. With original box and paperwork.

SMITH & WESSON Lockback Folding Knife. 3-1/2 inches closed. 6 inches open. "Smith & Wesson" tang stamp. Blade etched "Smith & Wesson FIRST PRODUCTION RUN U.S.A.". Black zytel handle with yellow scrimshawed inlay featuring image of Princess Diana, a rose, and "Princess Diana 1961-1997".

4 inches closed. 7-1/8 inches open. Black 8CR15MoV high-carbon stainless steel Tanto-style blade with Combined Razor-Sharp and Triple-Point Serrated edges. Blade etched "CARSON DESIGN M16-10KZ U.S. PAT.NO. 5,596,808" and "CRKT" with logo. Black glass-filled nylon handle. With removable pocket clip, dual thumb studs, the Carson flipper for easy opening, and AutoLAWKS knife safety system.

2-Blade Mini-Trapper Knife. 3-1/2 inches closed. 6-1/4 inches open. Made in USA. " x x*x   CASE XX *x*x* " (with lightning bolt S) and "USA 3207 CV" tang stamps. Double oval 'Open C' CASE shield. Chrome vanadium blades. Yellow composition handle. Nickel Silver bolsters. Brass liner. With original box and paperwork.

2-5/8 inches closed. 4-5/8 inches open. Made in USA. "  x x x  Case XX   x x*  " (with lightning bolt S) and "USA 8333 SS" tang stamps. No shield. Stainless Steel blades. Mother of Pearl handle. Nickel Silver bolsters and liner.

3-7/8 inches closed. 6-3/4 inches open. Made in USA. Front Tang Blade 1: CASE XX STAINLESS USA ; Rear Tang Blade 1: 6347HP SSP ; Front Tang Blade 2 & 3: SS. Double Oval 'Open C' CASE shield. Stainless steel blades. Front blade 1 etch: TESTED XX RAZOR EDGE. Red Jigged Pretty Bone handle. Nickel Silver bolsters and liner.

Texas Ranger 180th Anniversary Bowie Knife. 12-1/2 inches long. Blade is 8 inches long. Made in Japan. "Smith & Wesson Custom" and "STEWART A. TAYLOR & SONS SEKI JAPAN" tang stamps. Blade etched with Texas Ranger logo and "1823 180th Anniversary 2003" on front and "One of 1000" on back. Stainless Steel blade. Wood handle. With leather sheath.

3-1/8 inches closed. 5-1/4 inches open. Made in USA. " *x*x* CASE XX x*x*x " and "USA 62109W SS" tang stamps. Oval 'Long C' Case XX shield. Stainless Steel blades. Natural Jigged Bone handle. Nickel Silver bolsters. Brass liner.

3-3/8 inches closed. 5-7/8 inches open. "FORD - 0052" tang stamp. Oval Ford logo shield. Red jigged bone handle. Nickel silver bolsters. Brass liner.

4 inches closed. 7 inches open. Made in USA. "CASE XX U.S.A." and "61011" tang stamps. No shield. Chrome Vanadium blade. Brown laminated pakkawood handle. Nickel Silver bolsters. Brass liner.

4-3/8 inches closed. 7-3/8 inches open. Made in USA. BUCK 500 X U.S.A. tang stamp. SATIN 420HC Stainless Steel blades. Smooth Grey Bone handle. Stainless Steel bolsters. Stainless Steel liner.

Limited Edition 1 of 2500. 3-1/8 inches closed. 5-3/8 inches open. Made in USA. "Case XX USA *** " (3 dot with lightning bolt S) and "62109X SS" tang stamps. Saturn shield. Stainless Steel blades. Master blade etched "LIMITED XX EDITION 1 of 2500". Black Jigged Bone handle. Nickel Silver bolsters. Brass liner. With original box and paperwork.

5-1/4 inches closed. 9 inches open. Made in China. Blade etched ' Smith & Wesson Homeland Security' with S&W logo on front and 'Performance 440' with S&W logo on back. 'Titanium 440 Steel' and 'Hand Forged Bullseye China' tang stamps. Smith & Wesson Logo shield. Titanium Coated Stainless Steel blades. With original box.

Limited Edition. 4-1/8 inches closed. 7-3/8 inches open. Made in USA. Front Tang Master Blade: x x x CASE XX x x* (5Xs, 1Dot, Longtail-C, Lightning Bolt S) ; Front Tang Blade 2: USA 6254 SS. Oval CASE XX Script shield. Stainless Steel blades. Amber Jig Bone handle. Rear handle Scrim: G. Harbour 1/10 Halloween 2014 (Pumpkins 4 Sale Autumn Farm Scene). Nickel Silver bolsters. Brass liner.

9-1/2 inches overall. 4-1/2 inch blade. Made in USA. Front tang: 'Colt USA'. Silver circle Colt shield. CT5 Stainless Steel blade. Black rubber handle. Stainless steel guard. Original Colt mahogany display plaque

Columbia River CRKT 6783N Large Zytel Crawford / Kasper Tactical Folding Knife. 5-3/8 inches closed. 9-1/4 inches open. "6783N" tang stamp. Blade etched "Crawford KASPER" and "U.S.PAT.NO. 5,596,808". Stainless liners covered with black Zytel? scales give this knife a very hefty feel. A thumb scallop on each side leads to the thumb stud for easier opening and more secure grip. An integral part of this tactical folder is the patented Lake & Walker Safety (LAWKS). Located at the top front of the knife, the LAWKS mechanism insures that the blade will remain locked under heavy cross stress. The lock is a Walker-Lock secured by the LAWKS safety.
<BR><BR>
While using this knife you will discover that your fingers are raised above the blade and away from the surface, and the index finger groove keeps it from slipping down to the blade. Friction grooves on the top of the handle and on the liner lock provide a more secure grip especially under wet conditions.
<BR><BR>
The handle shape is classic Kasper profile, ample without being cumbersome. The textured black Zytel? scales are flat with no swell so the knife won’t print in the pocket, and to make drawing smoother. The thumb scallop on the left scale acts as an index point for the initial grip and draw, is also a ramp leading down to the thumb stud, and helps the index finger secure a more positive grip. The thumb ramp has aggressive friction grooves to ensure thumb purchase under slippery conditions. The blade is a stout, modified clip point of 420J2 stainless steel, double hollow ground and bead-blast finished to cut reflectivity. Both Razor-Sharp and Combination Razor-Sharp and Triple-Point™ Serrated blades are available. The thumb ramp features double thumb studs for ambidextrous use.

3-7/8 inches closed. 6-3/4 inches open. Made in USA. "Case XX USA ** " (2 dot with lightning bolt S) and "Muskrat SS" tang stamps. Oval CASE XX Block Letter shield. Stainless steel blades. Master blade etched "MUSKRAT" and with image of a Muskrat. Pink Jigged Bone handle. Nickel Silver bolsters. Brass liner. With original box.

2-Blade Gunstock Jack Knife. 3-1/2 inches closed. 6-3/8 inches open. Made in Germany. "PALMETTO CUTLERY CLUB" over palm tree logo and "FRANK BUSTER CUTLERY CO. GERMANY" tang stamps. Master blade etched "Palmetto Cutlery Club 1979 1 of 200" and serial #. Mother of Pearl handle. Nickel Silver bolsters. Brass liner.

2-Blade Hunter Bullet Knife. 5-3/8 inches closed. 9-1/2 inches open. Made in USA. 'Remington UMC Made in USA' and '1986' and 'R1263' tang stamp. Bullet shield. Stainless Steel blades. Delrin handle. Brass liner. With original box and paperwork.

4 inches closed. 7 inches open. Made in USA. "CASE XX USA ** " (2 dot) and "6292" tang stamps. Double Oval 'Open C' CASE shield. Chrome Vanadium blades. Brown/Grey Jigged Bone handle. Nickel Silver bolsters and liner.

4-1/4 inches closed, 7-3/8 inches open. Made in USA. "CASE XX * USA ** 51549L SS" (3 dot with lightning bolt S) tang stamp. Oval 'Closed C' CASE-XX shield. Stainless Steel blade. Stag handle. Nickel Silver bolsters. Brass liner.

3-5/8 inches closed. 6-1/2 inches open. Made in USA. "CASE XX ***** USA" (5 dot with lightning bolt S) and "2137" tang stamp. Chrome Vanadium blade etched "SOD BUSTER JR". Smooth Black Composition handle. Brass liner.

3-7/8 inches closed. 6-5/8 inches open. Made in Germany. Round Puma logo shield. Stainless Steel blades. Zytel handle.

3-Blade Large Stockman Knife. 5-1/2 inches closed. 9-5/8 inches open. Made in Germany. "1998 HAND MADE" with Bulldog logo and "BULLDOG BRAND HAMMER FORGED SOLINGEN GERMANY" tang stamps. Plain crest shield. Blade etched "BULLDOG BRAND" with logo and scrollwork. Beautiful Mother of Pearl handles. Nickel Silver bolsters. Brass liner.

3-7/8 inches closed. 6-1/2 inches open. Made in USA. "Case XX Tested", "Case TestedXX 19 USA 94", Case Tested XX USA" and "Tested XX 65039" tang stamps. Arrow shield. Chrome Vanadium Steel blades. Antique Green Standard Jig Bone handle. Nickel Silver bolsters. Brass liner.

4 inches closed. 7-1/8 inches open. Made in USA. "SCHRADE U.S.A. SC505" tang stamp. High Carbon Steel blades. Whale tooth delrin handle depicts a raccoon scene. Nickel Silver bolsters. Brass liner. With original box and paperwork.

3-3/4 inches closed. 6-1/2 inches open. Made in USA. "CASE XX U.S.A" and "6231 1/2" tang stamps. Double Oval 'Open C' CASE shield. Chrome Vanadium blades. Red/Brown Jigged Bone handle. Nickel Silver bolsters. Brass liner.

Limited Edition of 1,000 . 3-7/8 inches closed. 7 inches open. Made in USA. Front tang Master Blade: CASE XX ****** USA (6 Dot, Lightning Bolt-S) ; Front tang Blade 2: 6249. Double Oval Open-C CASE shields. Chrome Vanadium blades. Master blade etch: CALLAWAY NUCLEAR POWER PLANT ; Blade 2 etch: ONE OF 1000. Brown Jigged Bone handle. Nickel Silver bolsters. Front right-facing bolster etched with unique serial number . Brass liner.

4-1/4 inches closed. 7-1/4 inches open. Made in USA. "Case XX *USA* 31549 L CV" tang stamp. Double Oval 'Open C' Case shield. Chrome Vanadium blade. Yellow Composition handle. Nickel Silver bolsters. Brass liner. With original box.

2-Blade. 3-5/8 inches closed. 6-1/4 inches open. Made in USA. 'Remington UMC Made in USA' and 'R103-B' and '2004' tang stamp. Bullet shield. Stainless Steel blades. Jigged Bone handle. Brass liner. With original box and paperwork.

2-3/4 inches closed. 4-3/4 inches open. Made in USA. "CASE XX Bradford, PA 19 USA 91" and "DR 6220 SS" tang stamps. Double oval open C "CASE" shield. Stainless steel blades. Red jigged bone handle. Nickel Silver bolsters. Brass liner. With original box and paperwork.

3-3/8 inches closed. 5-3/4 inches open. Made in Germany. Fight'n Rooster logo with "SOLINGEN" and "FRANK BUSTER CUT CO. GERMANY" tang stamps. Master blade etched "THE CAPTAIN'S Rooster". Mother of Pearl handle. Nickel Silver bolsters. Brass liner.

Single blade Lockback Knife with nice filework. Made by Taylor Cutlery. Limited edition #142. 4-1/2 inches closed. 7-7/8 inches open. Surgical steel blade etched with image of cowboy roping a steer. "ELK HORN SURGICAL 1980" and "Taylor Cutlery Japan" tang stamps. Beautiful mother of pearl handle. Right front bolster etched with serial #142.

4-1/8 inches closed. 7-3/8 inches open. Made in USA. " x x*x Case XX *x*x* " (with lightning bolt S) and "USA 6254 SS" tang stamp. Oval 'Long C' Case XX Embossed shield. Stainless Steel blades. Rough black handle. Nickel Silver bolsters. Brass liner.

3-7/8 inches closed. 6-1/4 inches open. Made in USA. "  x*x  CASE XX  x x*x " (with lightning bolt S) and "USA 6355WH SS" tang stamps. Round NKCA shield. Stainless Steel blades. Master blade etched with"2003 NKCA CLUB KNIFE 1 of 1,175". Jigged walnut bone handle. Nickel Silver bolsters. Brass liner.

3-3/8 inches closed. 6 inches open. Carbon fiber handle with light blue hardware. ATS-34 blade etched with serial #767 and "SPYDERCO SWISS MADE ATS-34 WALKER". Clip is etched "SWISSMADE" and "US PATENT 4347665 FOREIGN PATS PEND". With original black padded pouch with spider logo and paperwork. This knife is very difficult to find, especially in perfect condition like this beauty! Get it while you can!

4 inches closed. 7-1/4 inches open. Made in USA. "CASE XX" and "62048SP" (worn) tang stamps. Double Oval 'Open C' Case shield. Chrome vanadium blades. Brown jigged bone handle. Nickel Silver bolsters. Brass liner.

Fixed Blade Bowie Sheath Knife. Blade is 9.5 inches long. Overall, knife is 14.5 inches long. Made in USA. 'Western U.S.A. W49 M' tang stamp. Carbon Steel blades. Wood handle. With original box and leather sheaf.

5 inches closed. 8-3/4 inches open. 'KA-BAR' and  'Union CP-92' tang stamp. Rosewood handle. Ka-Bar raised letter oval shield. Stainless steel blade. Nickel Silver bolsters. Brass liner. Made in USA. With original box.

4-1/8 inches closed. 7-3/8 inches open. Made in USA. "Case XX USA **** " (4 dot with lightning bolt S) tang stamp. Stainless Steel blades. Black Zytel handle. Brass liner.

4 inches closed. 7-1/8 inches open. Made in Germany. Front Tang Master Blade : (H&R Logo) SOLINGEN GERMANY ; Master blade Rear tang: BERTRAM CUTLERY 313-R ; Front Tang Blade 2 & 3: (H&R Logo) ROSTFREI. H&R Logo Circle shield. Stainless Steel blades. Red Celluloid or Corelon handle. Nickel Silver bolsters. Brass liner.

3-Blade Swell-Center Whittler Knife. 3-1/2 inches closed. 5-3/4 inches open. Made in USA. "CASE XX" and "6383" tang stamps. Double Oval 'Open C' CASE shield. Chrome Vanadium blades. Red Jigged Bone handle. Nickel Silver bolsters. Nickel Silver liner.

5-1/4 inches closed and approx. 9-1/2 inches open. Made in USA. CASE XX *****SS**** USA (9 dot with lightning bolt S) and 6151 tang stamps. Double oval open-C CASE shield. Chrome vanadium blades. Master blade etched 1st EDITION CASE COLLECTORS CLUB 1981 with green lettering and banner. Brown jigged bone handles. Nickel silver bolsters. Brass liner.

Read More

3-5/8 inches closed. 6-1/8 inches open. Made in USA. "  x*x  CASE XX  x x*x  " (with lightning bolt S), "SS", and "USA 6318 SS" tang stamps. Single Oval Long C "Case XX" shield. Stainless Steel blades. Red jigged bone handle. Nickel Silver bolsters. Brass liner.

4 inches closed. 6-7/8 inches open. Made in USA. "CASE XX U.S.A. ****** " (6 dot skewed to the right) and "63047" tang stamps. Double Oval 'Open C' CASE shield. Chrome Vanadium blades. Brown Jigged Bone handle. Nickel Silver bolsters. Nickel Silver liner.

3-3/4 inches closed. 6-3/8 inches open. Made in USA. "Case XX U.S.A. ******** " (8 dot) and "640045R" tang stamps. Double Oval 'Open C' CASE shield. Chrome vanadium blades. Jigged delrin handle. Nickel Silver bolsters. Brass liner.

Limited Edition. 3-5/8 inches closed. 6-1/8 inches open. Made in USA. Blade 1 front tang: Case XX (longtail C) USA ***** (5 dot with lightning bolt S); blade 2 front tang: 52131 SS. Double oval open-C CASE shield. Stainless steel blades. Blade 1 etch: INDIAN HEAD NICKEL with 2 images of front and back of nickel. Blade 2 etched with image of teepees and a buffalo. Rare red stag handle. Nickel Silver bolsters, front right bolster etched with unique serial number. Brass liner.

Limited Edition of 350; was available exclusively from Mr. Tom Arrowsmith (President and CEO of W.R. Case & Sons Cutlery Company) as he visited Case retail locations throughout America. 4-1/8 inches closed. 7-1/4 inches open. Made in USA. "   x*x*x   CASE XX  *x*x*  " and "USA 6154 SS" tang stamps. Stainless steel blade etched with Mr. Arrowsmith's signature. Smooth Old Red bone handle engraved "President's Knife" in white. Nickel Silver bolsters and liner.

3-5/8 inches closed. 6-1/4 inches open. Made in USA. "Case XX USA **** " (with lightning bolt S) and "62131 SS" tang stamps. "CASE XX" bar shield. Stainless Steel blades. Master blade etched "Limited XX Edition 1 of 2500". Green corn cob jigged bone handle. Nickel Silver bolsters. Brass liner.

4 inches closed. 6-7/8 inches open. Parkerwood handle. With original box.

Designed by long-time Case employee, Thomas Hart. 2-3/4 inches closed. 4-7/8 inches open. Made in USA. "  x x  CASE XX x x x  " (with lightning bolt S) and "USA 61165 T.H. SS" tang stamps. "CASE*USA" shield. Stainless Steel blades. Blue Jigged Bone handle. Nickel Silver bolsters. Brass liner.

Fixed Blade Knife. 8-1/8 inches long. Carbon steel blade etched "KELLAM" and "SPT". Stained curly birch handle with brass ferrule. With leather sheath embossed with logo and "Wolverine".

4-1/4 inches closed. 7-7/8 inches open. Made in USA. "  x*x  CASE XX  x x x  " (with lightning bolt S) and "USA 6254 SS" tang stamps. Oval "CASE MADE IN USA" shield. Stainless Steel blades. Jigged Honey Brown Bone handle. Nickel Silver bolsters. Brass liner.

Fixed Blade Skinner Knife. 10 inches long. "CT0007 STAINLESS HANDCRAFTED IN CHINA" tang stamp. Blade etched "COLT SINCE 1836" with logo. Pakkawood handle. Stainless steel guard. Colt inlay shield. With original box and brown leather sheath.

Limited Edition of 300; was available exclusively from Mr. Tom Arrowsmith (President and CEO of W.R. Case & Sons Cutlery Company) as he visited Case retail locations throughout America. 3-1/2 inches closed. 5-7/8 inches open. Made in USA. "Case XX x" (with lightning bolt S) and "USA 63046 SS" tang stamps. Stainless Steel blades with Mr. Arrowsmith's signature etched onto master blade. Smooth old red bone handle engraved "President's Knife" in white. Fluted nickel Silver bolsters. Brass liner.

Fixed Blade Hunter Ridgeback Knife. 8-1/2 inches long. Made in USA. "  x*x*x  CASE XX USA  *x*x*  " (with lightning bolt S) tang stamp. Rosewood handle.  With original leather sheath, original box, and paperwork.

Fixed-Blade Sharp Finger Knife. 7-1/4 inches long. Made in USA. "SCHRADE U.S.A. SC502" tang stamp. Stainless Steel blade etched "Schrade Scrimshaw". Whale tooth delrin handle depicts image of the head of a pronghorn. With original box, leather sheath, and paperwork.

3333px;"> celebrate the 175th Anniversary of the Texas Rangers. 3-1/2 inches closed. Stainless steel blades with 175th Anniversary etch on main blade. 175th Anniversary shield. Staglon handle. Nickel silver bolster and brass pins and liners. Packaged in a custom collector's tin.

5-3/8 inches closed. 9-5/8 inches open. Made in USA. "CASE XX BRADFORD, PA 19 USA 90" (with lightning bolt S) and "BGC61050 SS" tang stamps. Round NKCA shield and gimp block letter "CASE" shield. Stainless steel blade etched "2nd OF THE MUSEUM SERIES KNIFE 1 OF 1,000". Jigged green bone handle. Nickel Silver bolsters. Brass liner.

3-3/8 inches closed. 6 inches open. Made in USA. "CASE XX" and "62055" tang stamps. Double Oval 'Open C' CASE shield. Chrome Vanadium blades. Brown Jigged Bone handle. Nickel Silver bolsters. Brass liner.

4-3/4 inches closed. 8-1/2 inches open. Made in USA. "CASE XX ****** USA" (6 dot with lightning bolt S) and "2138" tang stamps. Chrome Vanadium blade etched "SOD BUSTER". Smooth Black Composition handle. Brass liner.

4-1/4 inches closed. 7-1/2 inches open. Blade etched 'Smith & Wesson Since 1852' with S&W logo. Titanium Coated 7Cr17MoV High Carbon Stainless Steel blades. With pocket clip and gift tin. NEW IN ORIGINAL RETAIL PACKAGING.

3-1/2 inches closed. 6-1/4 inches open. Stainless steel blade etched with Heston's signature. "STAINLESS STEEL" tang stamp. Rifle shield. Wood handle. Brass bolsters. Packaged in a custom collector's tin.

4-1/8 inches closed. 7-3/8 inches open. Made in USA. 'CASE XX STAINLESS USA * ' (1 dot) and '61048 SSP' tang stamps. Single Oval 'Open C' CASE shield. Stainless Steel blade. Jigged Delrin handle. Nickel Silver bolsters. Brass liner.

With gut hook and bone saw. 5 inches closed. 8-3/4 inches open. Made in USA. Circle "REMINGTON UMC MADE IN USA" and "R-3" tang stamps. Circle "REMINGTON UMC" shield. Stainless steel blades. Brown jigged delrin handle. Nickel silver bolsters and liner. With original box, paperwork, and leather sheath with sharpening rod.

4-1/8 inches closed. 7-3/8 inches open. Made in USA. "CASE XX BRADFORD, PA 19 USA 90" and "3254" tang stamps. Double oval "Open C" shield. Chrome vanadium blades. Main blade etched "COLT PEACEMAKER .43 CAL. 1871" with round Colt logo and image of gun (error in printing, double image). Secondary blade etched "GOD CREATED MEN, COLONEL COLT MADE THEM EQUAL" WITH "Colt" text logo. Yellow Composition handle. Nickel Silver bolsters. Brass liner.

4-1/8 inches closed. 7-3/8 inches open. Made in USA. "CASE XX BRADFORD, PA 19 USA 91" and "5254 SS" tang stamps. Double oval "Open C" shield. Stainless steel blades. Stag handle. Nickel Silver bolsters. Brass liner.

5 inches closed. 8-3/4 inches open. Made in USA. "CASE XX U.S.A." and "61093" tang stamps. Double oval 'open C' CASE shield. Chrome vanadium blade. Brown jigged bone handle. Nickel Silver bolsters. Brass liner.

Single Blade Lockback Knife. Texas Knife Collectors limited edition #012 of only 173 made. 4-5/8 inches closed. 8 inches open. Made in USA. "TKCA" and "ALCAS" with logo tang stamps. (ALCAS = Alcoa & W. R. Case & Sons Cutlery). Bullet shield etched with serial #012. Stainless Steel blade etched "TEXAS KNIFE COLLECTORS #7 1986 1 of 173" with logo and "TEXAS SESQUICENTENNIAL". Stag handle. Nickel Silver bolsters. Front right bolster etched "TKCA" inside the state of Texas. Brass liner.

Single-Blade Pruner Knife. 3-3/8 inches closed. 6 inches open. "I-XL GEORGE WOSTENHOLM SHEFFIELD ENGLAND" tang stamp. Master blade etched " I*XL ". Brass handle etched "TYNE".

4-1/4 inches closed. 7-1/4 inches open. Made in USA. "Case XX *USA* 61549 L SS" tang stamp. Oval 'Closed C' CASE-XX shield. Stainless steel blade. Smooth green appaloosa bone handle. Nickel Silver bolsters. Brass liner.

14 inches long. Made in USA. Blade etched with image of Davy Crockett and "CASE XX USA 1836". Black phenolic handle. Brass guard. With black leather & brass sheath embossed with "Case XX" logo in gold lettering.

Limited edition with unique serial number engraved on front right bolster. 3-5/8 inches closed. 6-1/4 inches open. Made in USA. CASE XX BRADFORD, PA 19 USA 90 and 72131 SS tang stamps. Double oval open-C CASE shield. Stainless Steel blades. Main blade etched CINCINNATI REDS 86TH WORLD SERIES 1990 CHAMPIONS. Secondary blade etched BIG RED MACHINE. Curly Maple handle. Nickel Silver bolsters. Brass liner.

Limited edition. Bulldog Brand was a Chattanooga, Tennessee based knife maker. The Master blade is etched with BULLDOG KNIFE CLUB 1998 and an image of a standing bulldog. 3-5/8 inches closed. 6-1/4 inches open. Made in Germany. 1998 (Bulldog logo) Hand Made and BULLDOG BRAND Hammer Forged Solingen Germany and 1998 HAND MADE with logo of Bulldog tang stamp. Badge shield. Surgical Steel blades. Pearl Celluloid handle. Nickel Silver bolsters. Brass liner. Original Bulldog Brand Knives box

New old store stock. Mint condition in original box. Never used, never sharpened, never carried. No cracks, no wobble, excellent snap.

Gerber logo over "GERBER PORTLAND, ORE. U.S.A." and serial #. Leather sheath with large clip etched "GERBER PORTLAND, OR. 97223".

5 inches closed. 8-7/8 inches open. Made in USA. "CASE XX STAINLESS USA * " (1 dot) and "5143 SSP" tang stamp. Double Oval 'Open C' Case shield. Stainless Steel blade etched with Long C "Case XX W.R. - JOB - J.R.", an image of the 3 founders, and the serial . Stag handle. Nickel Silver bolsters. Brass liner.

4-3/4 inches closed. 8-3/8 inches open. Made in USA. "CASE XX STAINLESS U.S.A. * " (1 dot) and "P197 L SSP" tang stamps. Stainless Steel blade etched with "SHARK TOOTH" and image of shark. Smooth Pakkawood handle. Brass bolsters. Oval 'Open C' CASE logo etched onto bolster. Brass liner.

3-3/8 inches closed. 5-3/4 inches open. Made in USA. "CASE XX ********* U.S.A. " (9 dot with lightning bolt S) and "087PE" tang stamps. Single Oval 'Open C' Case shield. Chrome vanadium blades. Brown Jigged delrin handle. Nickel Silver bolsters. Brass liner.

Vintage 2-Blade survivor knife from WWII era. These knives were packed in lifeboats and aviator survival kits. 6 inches closed. 10-3/4 inches open. Made in USA. Textured black handle. Black blades and black brushed bolsters.

4-1/8 inches closed. 7-3/8 inches open. Made in USA. Front tang Blade 1: x x x Case XX x x* ; Front Tang Blade 2: USA 9254 SS. Case XX Script Bomb shield. Stainless Steel blades. Front blade etch: PREMIER EDITION ONE OF 2,500 SAPPHIRE GLOW. Sapphire Glow Corelon handle. Slanted Nickel Silver bolsters. Brass liner.

3-3/8 inches closed. 5-3/4 inches open. Made in Germany. Front Tangs: (Two Roosters) SOLINGEN ; Rear Tang Master Blade: FRANK BUSTER CUT CO. GERMANY. Plain Bar shield. Steel blades. Master Blade etch: BLACK (two roosters) DIAMOND 1982. Black Composite handle. Nickel Silver bolsters. Brass liner.

Vintage Rigging Knife with Marlinspike. 4-1/2 inches closed. 7-1/4 inches open. Made in USA. "KA-BAR OLEAN, N.Y." tang stamp. Black composition handle etched "KA-BAR RIGGING KNIFE". 

4-1/8 inches closed. 7-3/8 inches open. Made in USA. "  x x  Case XX   x x " (with lightning bolt S) and "USA 6254 SS" tang stamps. Bowtie "CASE" recessed letter shield. Stainless Steel blades. Reddish orange barnboard jigged bone handles. Nickel Silver bolsters. Brass liner.

Limited Edition of 100 . 4-7/8 inches closed. 8-1/2 inches closed. Made in USA. Front Tang: BUCK 110 (Down Arrow) U.S.A. Silver Eagle and Moon shield. Native Steel blade. Madagascar Ebony Diamond Wood handle. Nickel Silver bolsters and liner.

3-3/8 inches closed. 6 inches open. Made in Germany. Front Tang Blade 2: (H&R Logo) SOLINGEN GERMANY ; Rear Tang Blade 2: BERTRAM CUTLERY ROSTFREI 193 DS ; Front Tang Blade 1 & 3: (H&R Logo) STAINLESS. H&R Logo Circle shield. Stainless steel blades. Genuine stag handle. Nickel Silver bolsters. Brass liner.

Made by Taylor Cutlery of Kingsport, TN. Limited edition #0733. 5 inches closed. 8-7/8 inches open. Surgical steel blade etched with bird images. "ELK HORN SURGICAL 1979" and "Taylor Cutlery Kingsport, TN Japan" tang stamps. Beautiful elk horn stag handle. Right front bolster etched with serial #0733.

4-1/8 inches closed. 7-3.8 inches open. Made in USA. Front Tang Blade 1: *x*x* CASE XX x*x*x (5Xs, 5 Dots, Longtail-C, Lightning Bolt-S) ; Front Tang Blade 2: USA 6254 HB SS ; Rear Tang Blade 2: USA. Oval CASE XX Script shield. Stainless Steel blades. Natural Corn Cobb Jig Bone handle. Nickel Silver bolsters. Brass liner.

3-1/2 inches closed. 5-7/8 inches opened. "NOVELTY CUTLERY IRELAND" tang stamp. Front handle is clear composite with image of DIZZY DEAN. Rear handle is black composite.

3-1/8 inches closed. 4-7/8 inches open. Made in USA. "CASE XX USA ** " (2 dot with lightning bolt S) and "06263 SS" tang stamps. Single Oval Block letter "CASE-XX" shield. Stainless Steel blades. Master blade etched with Dwight Eisenhower's signature. Brown Jigged Bone handle. Nickel Silver bolsters. Brass liner.

3-1/8 inches closed. 4-7/8 inches open. Made in USA. "CASE XX *****SS**** USA " (9 dot with lightning bolt S) and "06263 SSP" tang stamps. Oval Open-C "CASE" shield. Stainless Steel blades. Master blade etched with 'Tested XX Razor Edge'. Brown Delrin Jigged handle. Nickel Silver bolsters. Brass liner.

3-1/8 inches closed. 4-7/8 inches open. Made in USA. "CASE XX USA *** " and "06263 SS" tang stamps. Single Oval "CASE-XX" shield. Stainless Steel blades. Master blade etched with Dwight Eisenhower's signature. Red Jigged Bone handle. Nickel Silver bolsters. Brass liner.

2-Blade Eisenhower Pen Knife. 3-1/8 inches closed. 4-7/8 inches open. Made in USA. "CASE XX ****SS*** USA" (7 dot with lightning bolt S) and "06263 SSP" tang stamps. Single Oval 'Open C' Case shield. Stainless Steel blades. Master blade etched "TESTED XX RAZOR EDGE". Jigged Delrin handle. Nickel Silver bolsters. Brass liner.

3-7/8 inches closed. 6-3/4 inches open. Made in USA. "CASE XX USA *** " (3 dots) and "5347 D" tang stamps. Double Oval 'Open C' CASE shield. Damascus blades. Stag handle. Nickel Silver bolsters and liner.

3-1/8 inches closed. 4-7/8 inches open. Made in USA. "CASE XX  x x " and "USA 06263 SS" tang stamps. "CASE USA" shield. Stainless Steel blades. Master blade etched with Dwight Eisenhower's signature. Blue Jigged Bone handle. Nickel Silver bolsters. Brass liner.

From the Limited Edition Case Millennium Set, limited to 500 sets.. 3 inches closed. 4-7/8 inches open. Made in USA. Case MM 5x 5* with longtail C and USA 06263 SS tang stamp. CASE MM shield. Stainless Steel blades. Jigged Red Bone handle. Nickel Silver bolsters. Brass liner. Mint condition in original box. Never used, never sharpened, never carried. No cracks, no wobble, excellent snap.

Limited Edition. 3 inches closed. 4-7/8 inches open. Made in USA. "CASE XX USA *  " (1 dot with lightning bolt S) and "06263 SS" tang stamps. Saturn 'Open C' shield. Stainless Steel blades. Master blade etched "LIMITED XX EDITION SERIES VI - MINT SET" and with 'Long C' logo and serial. Black smooth bone handle. Scrolled Nickel Silver bolsters. Brass liner.

3-1/8 inches closed. 4-7/8 inches open. Made in USA. "  x*x  CASE XX  x x x  " and "USA 06263 SS" tang stamps. Single oval "CASE XX" shield. Stainless Steel blades. Master blade etched with Dwight Eisenhower's signature. Caribbean blue Jigged Bone handle. Nickel Silver bolsters. Brass liner.

3-1/8 inches closed. 4-7/8 inches open. Made in USA. "  x*x*  CASE XX  *x*x*  " and "USA 06263 SS" tang stamps. Oval 'long C' script "CASE XX" shield. Stainless Steel blades. Master blade etched with Dwight Eisenhower's signature. Amber Jigged Bone handle. Nickel Silver bolsters. Brass liner.

Limited Edition Knife Set. Includes 3 single-blade lockback pocket knives with scrimshawed handles. Stainless steel blades etched "WINCHESTER Limited Edition 2006". Includes presentation box which measures 7-1/2" x 6-1/2" x 1-1/2".

3-3/4 inches closed. 6-3/4 inches open. Made in USA. BUCK 701 > U.S.A. tang stamp. Oval Buck shield. Stainless Steel blades. Smooth Pakkawood handle. Nickel Silver bolsters. Nickel Silver liner.

4-1/8 inches closed. 7-1/8 inches open. Made in USA. " Case XX USA *** " (3 dot with lightning bolt S) and "R5299 1/2 SS" tang stamps. Oval 'Closed C' CASE-XX shield. Stainless Steel blades. Burnt stag handle. Nickel Silver bolsters. Brass liner.

3-1/2 inches closed. 6-1/8 inches open. Made in USA. " x x*x CASE XX  *x*x* " (with lightning bolt S) and "USA 6207 SS" tang stamps. Green John Deere shield. Stainless steel blades. Jigged yellow bone handle. Nickel Silver bolsters. Brass liner. With original tin, paperwork, and cardboard sleeve.

3-5/8 inches closed. 5-7/8 inches open. Made in Germany. 'Boker U.S.A.' and '70113' tang stamps. Olde Stag shield. Stainless Steel blades. Main blade imprinted 'Tree Brand Made in Germany'. Delrin Stag handle. Nickel Silver bolsters. Brass liner. With original box.

2-1/2 inches closed. 4 inches open. Made in USA. "CASE XX *****SS**** USA" (9 dot with lightning bolt S) and "M1056 LSSP" tang stamps. Stainless Steel blade. Brushed stainless steel handle deep-etched with single oval open-C "CASE" logo.

Limited Edition Bicentennial knife. 5-1/2 inches closed. 9-5/8 inches open. Made in USA. "SCHRADE" tang stamp. Stainless steel blade with beautiful etched design. Thick stag handle. Fancy nickel silver bolsters and brass liner. Front right bolster etched with serial #. No box.

Limited Edition #4657. 4 inches closed. 7 inches open. Made in Germany. 'Boker Solingen Germany' with Tree Logo and "6066" tang stamps. Special "STONEWALL JACKSON" shield. Blade stamped with battle scene. Smooth gray composition handle. Nickel Silver bolsters and brass liner. Front right bolster etched with serial #4657. No box.

4-1/8 inches closed. 7-1/8 inches open. Made in Japan. "kershaw Blue Mountain" and "3130 Japan" tang stamps. Stainless Steel blades. Black crosscut ABS handle. Matte finish stainless steel bolsters and liner.

2-5/8 inches closed. 4-5/8 inches open. Made in USA. "CASE XX USA *** " (3 dot) and "63033" tang stamps. Oval 'Open C' Case shield. Chrome vanadium blades. Brown jigged delrin handle. Nickel Silver bolsters and liner.

Tony Bose . 3-7/8 inches closed. 6-1/2 inches open. Made in USA. "  x*x* Case XX   x*x*x " (with lightning bolt S) and "USA T.B.6339 SS"" tang stamps. Oval 'Long C' CASE XX shield. Stainless Steel blades. Amber Peachseed Jigged Bone handle. Nickel Silver bolsters. Brass liner.

Limited Edition of 198. 3-1/4 inches closed. 5-5/8 inches open. Made in USA. Front Tang Master Blade: CASE BRADFORD, PA. 19 USA 93 ; Rear tang Master Blade: TESTED XX 730109X ; Front Tang Blade 2: CASE XX TESTED ; Front Tang Blade 3: CASE BRADFORD, PA USA. Double Oval Open-C CASE shield. Stainless Steel blades. Master blade etch: CASE BRADFORD PA. Patriot Swirl Celluloid handle. Slanted Nickel Silver bolsters. Brass liner.

2-Blade Serpentine Jack Knife. 3-1/4 inches closed. 5-1/2 inches open. Made in USA. "CATTARAUGUS CUTLERY Co LITTLE VALLEY" and "22187" tang stamps. Striated Green Fiberloid handle. Nickel Silver bolsters. Brass liner.

Limited edition of 400 made. 3-1/2 inches closed. 6-1/4 inches open. Made in Germany. Front Tangs: (two roosters) SOLINGEN ; Rear Tang: FRANK BUSTER CUTLERY GERMANY. Steel blades. Front Master blade etch: TAR HEEL CUTLERY CLUB 1 of 400 1980, and serial number engraved above the tang. Genuine Mother of Pearl handle. Nickel Silver bolsters. Brass liner.

3-1/4 inches closed, 5-7/8 inches open. Made in USA. Master blade front tang: 'Buck 303 (symbol for 2015) U.S.A.'. Hammer & Knife Bar shield. Stainless Steel blades. Black Sawcut Delrin handle. Nickel silver bolsters. Nickel silver liner.

Bulldog Brand was a knife brand located in Chattanooga, Tennessee. Blade is laser-etched Pit Bulls Trade Mark with an image of a dog fight. Small blade is engraved 'Prototype'. 3-3/8 inches closed. 5-7/8 inches open. Made in Germany. Bulldog logo Hand Made and Bulldog Brand Hammer Forged 1995 Solingen Germany tang stamps. Badge shield. Surgical Steel blades. Grey Swirl Celluloid handle. Nickel Silver bolsters. Brass liner. Original Bulldog Brand Knives box

New old store stock. Mint condition in original box. Never used, never sharpened, never carried. No cracks, no wobble, excellent snap.

3-5/8 inches closed. 6-1/2 inches open. Made in USA. " CASE XX STAINLESS U.S.A.  *****  " (5 dot) and "P137 SS" tang stamps. Blade etched "Case's XX KENTUCKY'S BICENTENNIAL 1774 - 1974" with image of a bird and a pioneer in 3 colors. Wood handle. Brass liner.

Made in USA. 'Winchester Trade Mark Made in USA' and '1950 '89' tang stamp. 5-1/2 inches closed. 9-3/4 inches open. SS blades. Stag handle. Nickel Silver bolsters. Brass liner. With original box.

Mel Pardue design. 4-3/8 inches closed. 7-1/2 inches open. Made in USA. ATS-34 Stainless Steel blade etched with Benchmade logo on front and "Mel Pardue Design" on back. Black aluminum handle with embossed Benchmade logo and pocket clip. "ATS-34" tang stamp. With original box and paperwork.

Master blade laser-etched 'Fight'n Rooster'. 3-5/8 inches closed. 6-1/4 inches open. Made in Germany. Front Tang: (two roosters) SOLINGEN ; Rear Tang: FRANK BUSTER CUTLERY CO. GERMANY. Silver Roosters shield. Stainless Steel blades. Zebra Swirl Celluloid handle. Fancy Nickel Silver Engraved bolsters. Brass liner.

3-1/8 inches closed. 5-3/4 inches open. Made in USA. "R493" tang stamp. Other tang stamp not visible. High-Carbon Alloy Steel blades. Sawcut handle. Nickel Silver bolsters. Front bolster stamped with "Boker Tree Brand" and tree logo. Brass liner. Brand New in original packaging.

International Brotherhood of Electrical Workers #175. 3-3/4 inches closed. 6-3/8 inches open. Made in USA. "USA KEEN KUTTER 91" tang stamp. Smooth bone handle. Nickel silver bolsters. Front right bolster etched "IBEW #175". Brass liner.

4 inches closed. 7 inches open. Made in USA. "CASE XX USA *** " (3 dot with lightning bolt S) and "6292 CV" tang stamps. Oval Closed-C "CASE XX" shield. Chrome Vanadium blades. Reddish Jigged Bone handle. Nickel Silver bolsters. Brass liner.

Limited Edition of 500. 4-1/8 inches closed. 7-1/4 inches open. Made in USA. " x x  CASE XX  x x x  " (with lightning bolt S) and "USA 6254 SS" tang stamps. Tru-Sharp Surgical Steel blades. Antique saw cut jigged bone handle with oval scrpit "Case xx" shield. Nickel Silver bolsters. Front right bolster etched with long-tail C serialization. Brass liner. With original wooden display box, knife box, collectable medallion, and certificate of authenticity.

5-3/4 inches closed. 10-1/2 inches open. "SCHRADE CUT. CO. WALDEN, N.Y." tang stamp. Yellow composite handle etched "COMPLIMENTS THE VISKING CORPORATION". Brass liner.

3-5/8 inches closed. 6-1/4 inches open. Made in USA. Front tang: *x*x* CASE XX x*x*x (5X, 5 dots, lightning bolt S, long-tail C) ; Rear tang: USA 61953 L SS, RussLock etch: TESTED XX. Oval Case XX Script shield. Stainless Steel blade. Burnt Orange Jig bone handle. Nickel Silver bolsters. Nickel Silver liner.

3-1/8 inches closed. 5-1/2 inches open. Made in Hong Kong. "UNITED" in globe logo and "UC272 SURGICAL STEEL HONG KONG" tang stamps. Surgical Steel blades. Pearl handle. Surgical Steel bolsters. Brass liner.

Serial #060 etched onto front right bolster. 5-3/8 inches closed. 9-3/4 inches open. Made in USA. "Winchester -Trade Mark- Made in USA" and "1950 '91 CC" tang stamps. Stainless Steel blade etched with gold scrollwork, red & blue flag images, and "MASON-DIXON KNIFE CLUB 1 OF 110 * 1991". Bowtie shield. Stag handle. Nickel Silver bolsters. Brass liner.

Limited Edition. 4-1/8 inches closed. 7-3/8 inches open. Made in USA. " CASE XX x x " (with lightning bolt S) and "USA 6254 SS" tang stamps. Special Guitar shield. Stainless Steel blades. Master blade embellished with "Johnny Cash". Jigged Black Bone handle. Nickel Silver bolsters. Brass liner. With Case Collectible Medallion, hardback clamshell case, certificate of authenticity, paperwork.

5-1/2 inches closed. 9-5/8 inches open. Made in USA. "CASE XX U.S.A. ********** " (10 dot) and "C61050SAB" tang stamps. Double Oval 'Open C' CASE shield. Chrome Vanadium blades. Jigged Pakkawood handle. Nickel Silver bolsters. Brass liner.

2-3/4 inches closed. 4-5/8 inches open. Made in USA. Round "CASE XX SELECT" and "USA 62132 SS" tang stamps. Bowtie "CASE XX" old font shield. Stainless steel blades. Master blade etched "The Legends". Smooth navy blue bone handle. Nickel silver bolsters. Brass liner.

Fixed Blade Knife. 9 inches long. Made in USA. "Case XX *****SS**** USA" (9 dot with lightning bolt S) and "R603 SSP" tang stamps. Blade etched with image of a Pawnee Native American.Wood handle. With "CASE" basket weave leather sheath.

Made in USA. 4-1/2 inches closed. 8-1/8 inches open. "QUEEN CUT. CO. TITUSVILLE, PA", and "S X M TITUSVILLE, PA" tang stamps. Stainless steel blade etched with "NKM Grand Opening Knife November 29, 2007". Worm groove bone handle. Plain figural shield and round NKCA shield. Nickel Silver bolsters. Brass liner. With original box.

4-1/8 inches closed. 7-3/8 inches open. "BW CUSTOM" tang stamp. Damascus blades. Wood handle with Celtic Clover brass inlay. Brass bolsters and liner. No box.

3-5/8 inches closed. 6-1/4 inches open. Made in USA. "Case XX U.S.A. ********** " (10 Dot) and "52131" tang stamps. Double Oval 'Open C' Case shield. Chrome Vanadium blades. Stag handle. Nickel Silver bolsters. Brass liner.

3-5/8 inches closed. 6-1/4 inches open. Made in USA. "Case XX 1889-1989" and "52131 SS" tang stamps. Double Oval 'Open C' Case shield. Stainless Steel blades. Master Blade etched "CASE XX TESTED CENTENNIAL 1889-1989". Stag handle. Nickel Silver bolsters. Brass liner.

3-7/8 inches closed. 6-7/8 inches open. Made in USA. "CASE XX USA ** " (2 dot) and "33092" tang stamps. Single oval 'open C' CASE shield. Chrome vanadium blades. Yellow composition handle. Nickel Silver liner.

3-1/4 inches closed. 5-3/8 inches open. Made in USA. "BUCK 703 U.S.A." (Script) tang stamp. Oval Script BUCK shield. Stainless Steel blades. Wood handle. Stainless steel bolsters and liner.

5-3/8 inches closed. 9-5/8 inches open. Made in USA. "CASE XX BRADFORD, PA 19 USA 90" (with lightning bolt S) and "DBC61050 SS" tang stamps. Round NKCA shield. Stainless steel blade etched "1st OF THE MUSEUM SERIES KNIFE 1 OF 1,500". Jigged brown bone handle. Nickel Silver bolsters; Brass liner.

5 inches closed. 8-1/2 inches open. Made in USA. Front Tang: 286 (2017 Symbol). 420HC Stainless Steel blade. Front blade etch: BUCK USA. Black GRN Nylon. Steel

12-1/8 inches long. Made in USA. Hand-forged carbon steel 6-7/8" x 2-5/8" blade stamped "CASE'S TESTED XX". Walnut handle.

2-5/8 inches closed. 4-5/8 inches open. Made in USA. "Case XX USA ***** " (5 dot) and "6333" tang stamps. Single oval 'Open C' CASE shield. Chrome vanadium blades. Brown jigged delrin handle. Nickel Silver bolsters and liner.

Limited edition #7131 commemorating the 50th anniversary of D. Day. 4-1/4 inches closed. 7-5/8 inches open. Mirror-polished stainless steel blade is laser engraved with the image of a soldier, "D DAY 50th anniversary 1944-1994", the OPINEL logo, "OPINEL INOX FRANCE" and serial # 7131. Rosewood handle. Bolster is etched "No. 8 VIROBLOC BREVETE". With original box.

Quick access knife for all outdoor activities. Blade is 2.38". Overall 5" long. Hand ground razor thin from 6M stainless steel blade. Tear drop Delrin handles for non-slip control. With a Swivel-Clip and Cord-Loop for a variety of attachments to a fishing or flotation vest, scuba-BC, belt loop, D-Ring, inside the pocket or around-the-neck carry.

Fixed Blade Bowie Knife. Limited Edition #454. 14-1/4 inches long. Blade is 9-1/2 inches long. Made in USA.  Blade etched with image on Abraham Lincoln, "THE MASON-DIXON SERIES", "Four score and seven years ago...", images of soldiers, and the date stamp "CASE XX ***SS*** USA 1836" (6 dot with lightning bolt S). Back of blade etched with serial #454. Genuine Stag handle. Brass finger guard and buttcap. Comes inside a clamshell case measuring 14 inches wide by 7 inches deep by 2 inches tall.

Limited Edition #077 of only 150 made. 3-5/8 inches closed. 6-1/2 inches open. Made in USA. 'Remington UMC Made in USA' and "R1173LD 2014" tang stamps. Bullet shield. 416 Ladder amascus blade. Amber Sawcut Bone handle. Nickel Silver bolsters. Front right bolster etched with serial #077. Brass liner. With original box and paperwork.

3-3/8 inches closed. 5-3/4 inches open. "The Intimidator" and "440 STAINLESS" tang stamps. 440 Stainless steel blades. Master blade etched with Dale Earnhardt's signature. Buffalo horn handle with round #3 shield. Nickel silver bolsters and brass liner. With original box.

Radio Shack Exclusive. 3-1/4 inches closed. Made in Switzerland. Includes a large blade, electrician's blade, phillips screwdriver, tweezers, and toothpick. Sealed in retail packaging.

3-7/8 inches closed. 7 inches open. "SCHRADE WALDEN", "STEWART A TAYLOR & SONS", and "294TXST" tang stamps. "REMEMBER THE ALAMO" etched on main blade. "REPUBLIC OF TEXAS" round shield. Stag handle. Nickel silver bolsters and brass liners. No box.

Digital display shows time, temperature, altitude, barometer, alarm and stop watch. 3-5/8 inches closed. 6-1/4 inches open. Made in Switzerland. 'Victorinox Switzerland Stainless Rostfrei' and 'Officier Suisse' with Crossbow and Swiss Cross Logo tang stamps. Stainless Steel blades.

Limited edition. Blade etched CASE TESTED XX. 4-3/8 inches closed. 8 inches open. Made in USA. CASE XX SS USA 3 dots with Lightning S and R6111 1/2 SS + G6111 1/2 SS tang stamps. Fancy Gold Long-tail C shield. Stainless Steel blades. Red & Green Jigged Bone handles. Nickel Silver bolsters. Brass liner. In original Case Tested XX velvet-lined display box

3-3/8 inches closed. 6 inches open. Made in USA. Front Tang: CASE XX U.S.A. ; Rear Tang: 62009R. Chrome Vanadium blade. Pretty Bone handle. Nickel Silver bolster. Brass liner. Bolster etch: CASE XX.

'CASE XX USA' and '5215 D' tang stamps with 'lightning S'. 2-7/8 inches closed. 5-3/8 inches open. Raised Letter Shield circa 1987-1989. Damascus blades. Stag handle. Nickel Silver bolsters. Brass liner. With original box, wrapper and paperwork.

3-1/8 inches closed. 5-3/8 inches open. Made in USA. "  x x   Case XX   x x x  " (with lightning bolt S) and "USA 059L SS" tang stamps. Tru-Sharp Surgical Steel blade etched "Merry Christmas!". Green Zytel handle with white inlay featuring the oval Case logo, a bear, and "Merry Christmas 2005".

Blade etched with 'XX'. 5-1/2 inches closed. 9-3/4 inches open. Made in USA. Front Tang: 'CASE BROTHERS Bradford, PA 19 USA 91' rear tang: TESTED XX 61098SAB'. Bowtie 'CASE' shield. Rogers Bone handle. Nickel Silver bolsters. Brass liner.

3-Blade whittler knife. Limited Edition 1 of only 250 made. 3-3/4 inches closed. 6-3/8 inches open. Made in USA. "2000", "6303 MADE IN USA", and "MOORE MAKER, INC. MATADOR, TEXAS" tang stamps. Stainless steel blades. Master blade etched "21st CENTURY ONE OF 250 COMMEMORATIVE JAN. 1, 2000" and "MOORE MAKER INC. MATADOR, TX". Beautiful stag handle. Oval "MOORE MAKER INC. MATADOR, TX" shield on front handle and plain oval shield on back. Nickel silver bolsters and brass liner. No box.

4-5/8 inches closed. 8 inches open. Made in USA. "WINCHESTER -TRADE MARK- MADE IN USA", "WR CASE & SONS BRADFORD, PA 19 USA 90", and "62091" tang stamps. Plain Oval shield. Chrome Vanadium blades. Master Blade etched "WINCHESTER TRADEMARK". Jigged Bone handle. Nickel Silver bolsters. Brass liner.

5-1/4 inches closed. 8-7/8 inches open. Made in Germany. "2000 HAND MADE" with Bulldog logo and "BULLDOG BRAND HAMMER FORGED SURGICAL INST. SOLINGEN GERMANY" tang stamps. Surgical steel blades. Special "2000" shield. Cream-colored swirl composition handles. Nickel Silver bolsters. Brass liner. No box.

3-1/2 inches closed. 5-7/8 inches open. Made in Germany. Front tang Blade 2 & 3: (H&R Logo) SOLINGEN GERMANY ; Rear Tang Blade 1: BERTRAM CUTLERY ; Front Tang Blade 1: (H&R Logo) ; Rear Tang Blade 3: 123 DS. (H&R Logo) Circle shield. Stainless Steel blades. Genuine Stag handle. Nickel Silver bolsters. Brass liner.

Limited edition of 250 made. 4 inches closed. 6-3/4 inches open. Made in Germany. Front Tangs: FIGHT'N ROOSTER (two roosters) SOLINGEN ; Rear Tang: FRANK BUSTER CELEBRATED CUTLERY GERMANY. Plain Gimp shield. Steel blades. Master Blade etched with BLACK MOUNTAIN WHITTLER 1985 1 of 250 (c) and # above the tang. Natural Bone handle. Nickel Silver bolsters. Brass liner.

Antique Tang Stamp Series. 4-1/4 inches closed. 7-5/8 inches open. Made in USA. Master blade Front tang: CASE TESTED XX (1920-1940 Tang stamp) ; Master blade Rear tang: x x x CASEXX *x*x* (5Xs, 3Dots, thick long-tail C, lightning bolt S) ; blade-2 front tang: USA 6375 SS ; blade-3 front tang: SS. Bowtie Open-C CASE shield. Stainless Steel blades. Brown Rodgers Jig Bone handle. Nickel Silver bolsters. Brass liner.

Single Blade Slimline Trapper. 4-1/8 inches closed. 7-3/8 inches open. Made in USA. "CASE XX STAINLESS USA" tang stamp. Double Oval 'Open C' CASE shield. Stainless steel blades. Red/Brown Jigged Bone handle. Nickel Silver bolsters. Brass liner.

4-1/8 inches closed. 7-3/8 inches open. Made in USA. "   x*x   Case XX  x*x*x " (with lightning bolt S) and "USA 6254 SS" tang stamps. Oval "John Deere" shield. Stainless Steel blades. Green jigged bone handle. Nickel Silver bolsters. Brass liner. With original gift tin, collector's medallion, and paperwork.

Single Blade Folding Lockback Knife. 5 inches closed. 8-1/2 inches open. Made in USA. "CAMILLUS NEW YORK U.S.A." tang stamp. Craftsman Special Edition logo shield. Blade etched "65th ANNIVERSARY 1927 to 1992". Jigged Bone handle. Front bolster etched with serial #1261. With original nice wood display box etched with Craftsman Special Edition logo.

3-3/8 inches closed. 5-3/4 inches open. Made in USA. 'CASE XX **SS* USA' and '63087 SS' tang stamp. Oval 'Open C' Case shield. Stainless Steel blades. Jigged Bone handle. Nickel Silver bolsters. Brass liner. With original box and paperwork.

2-Blade Muskrat Bullet Knife. Limited Edition #173 of only 500 made to commemorate the 30th Anniversary of the Remington Bullet Knife. 3-5/8 inches closed. 6-3/8 inches open. Made in USA. Circle "Remington UMC Made in USA" and "R4466-30", and "2012" tang stamps. Bullet "30 Years" shield. Stainless Steel blades. Master blade etched "Remington Mint Series Set 30th Anniversary 1982 2012 LIMITED PRODUCTION 500". Green curly maple handle. Front right bolster etched with serial #173. Brass liner. With original box and paperwork.

3-3/4 inches closed. 6-5/8 inches open. Made in Germany. Front Tang Blade 1: (H&R Logo) SOLINGEN GERMANY ; Rear Tang Blade 1: BERTRAM CUTLERY ROSTFREI 213 DS ; Front Tang Blade 2 & 3: (H&R Logo) STAINLESS. Hen & Rooster Circle Shield. Stainless Steel blades. Genuine Stag handle. Nickel Silver bolsters. Brass liner.

3-3/4 inches closed. 6-1/2 inches open. Made in Germany. "OWL HEAD" with logo and "SOLINGEN" tang stamps. Circle Owl Head Logo shield. Stainless Steel blades. Master blade etched with scrollwork and "OWL HEAD STAINLESS". Stag handle. Nickel Silver bolsters. Brass liner.

Designed by Tony Bose. 3-1/8 inches closed. 5-1/2 inches open. Made in USA. "     CASE XX   x x " (with lightning bolt S) and "USA T.B.62117 SS" tang stamps. 'Long C' CASE XX bomb shield. Stainless Steel blades. Mahogany jigged bone handle. Nickel Silver bolsters. Brass liner.

Limited Edition NKCA Annual Club Knife #2355 of 6000 produced by Schrade under Rodgers Wostenholm. 3-5/8 inches closed. 6-1/4 inches open. "RODGERS WOSTENHOLM ENGLAND" and "N.K.C.A." tang stamps. Master blade etched "NKCA ONE OF 6000". Jiggled green bone handle. Nickel Silver bolsters; front right bolster etched with serial #2355. Brass liner.

Fixed Blade Knife. 6 inches long. Made in Japan. "A.G. Russell" etched onto blade. "JAPAN" tang stamp. Wood handle. With leather sheath.

Limited edition of 800. 3-3/4 inches closed. 6-3/4 inches open. Made in Germany. Front Tangs: FIGHT'N ROOSTER (two roosters) SOLINGEN ; Rear Tangs: FRANK BUSTER CELEBRATED CUTLERY GERMANY. Plain Heart shield. Steel blades. Master Blade etched with 1991 GRAVE (Coffin & Skeleton) DIGGER 1 of 800, and # above the tang. Smoke Celluloid handle. Nickel Silver bolsters. Brass liner.

3-1/2 inches closed, 6 inches open. Made in USA. Front tang: 'x x x Case XX x x' (thick long tail C, 5 x's). Rear tang: 'USA TB61028 SS'. Bowtie XX shield. Stainless steel blade. Burnt Antique Jigged Bone handle. Nickel silver bolsters. Brass liner.

2-Blade Jack Knife. 3-1/4 inches closed. 6 inches open. No tang stamps. Circle "W" shield. Wood handle with mother of pearl insert. Stainless steel blades etched "Winchester" and "2008". Stainless steel bolsters and liner.

3-5/8 inches closed. 6-1/4 inches open. "GERBER 500" and "PORTLAND, OR USA" tang stamps. With original box (not pictured).

Single Blade Folding Linerlock Knife. 5 inches closed. 8-1/2 inches open. Made in Taiwan. "GIGAND" with logo and "AUS-8 Taiwan" tang stamps. AUS-8 Stainless Steel blade etched "DESIGN BY Fred Carter". Lightweight chrome-plated aluminum frame. Blue anodized aluminum with blue aluminum textured insert handles. Finger grips design and corrugated thumb rest for safe handling. Pocket/belt clip and lanyard hole.

3-3/8 inches closed. 5-7/8 inches open. Made in Germany. Master blade front tang: (H&R Logo) Solingen Germany ; Master blade rear tang: Bertram Cutlery 333 DS. Secondary blades: (H&R logo) ROSTFREI. Hen & Rooster Logo shield. Stainless Steel blades. Front blade etch: (H&R Logo) Hen & Rooster 'World's Finest Cutlery'. Genuine Stag handle. Nickel Silver bolsters. Brass liner.

Single Blade Outdoorsman Lockback Knife. 5 inches closed. 8-1/2 inches open. Made in USA. 'Remington UMC Made in USA' and 'R-9' tang stamp. Circle Remington UMC shield. Stainless Steel blades. Delrin handle. Nickel Silver bolsters and liner. With original box, leather sheath, and paperwork.

This rare, discontinued fixed blade knife is super high-quality and indestructible! The entire knife was made from a single solid billet of steel. 8-1/4 inches long overall. 4-1/4 inch long blade stamped with Chris Reeve logo and "MADE IN USA". Aluminum handle. Removable aluminum butt cap with storage area in handle. With lanyard hole and black leather sheath embossed with Chris Reeve logo.

3-3/4 inches closed. 6-1/2 inches open. "BUCK CREEK" with Antler logo, "OIL THE JOINTS", and "SOLINGEN GERMANY" tang stamps. Master blade etched "COPPERHEAD HAND MADE" and "92" with a copperhead image. Cream/tan composition handle. "BUCK CREEK" badge shield. Nickel Silver bolsters. Brass liner.

3-1/2 inches closed. 6-1/4 inches open. Made in USA. Front tang: x*x Case XX x*x*x (longtail-C and lightning bolt-S) ; Rear tang: USA 61953L SS. Oval CASE XX Script shield. Stainless Steel blade. Ultra Violet Burnt Jigged Bone handle. Nickel Silver bolsters and liner.

3-5/8 inches closed. 6-3/4 inches open. Made in USA. Master blade front tang: 'CASE XX' (thin longtail-C, 5 x's 4 dots). Master blade rear tang: 'USA 3185 CV'. Double Oval Open-C CASE shield. Chrome Vanadium blades. Green Swirl composite handle. Nickel silver bolsters. Brass Liner.

Limited edition of 164. 3-1/2 inches closed. 6 inches open. Made in USA. Front Tang Master Blade: CASE 19 XX 94 ; Rear tang Master Blade: TESTED XX 63083 ; Front Tang Blade 2 & 3: CASE XX BRADFORD, PA USA. Open-C CASE Bomb shield. Stainless Steel blades. Antique Yellow Bone handle. Nickel Silver bolsters. Brass liner.

.

3-3/4 inches closed. 6-3/8 inches open. Made in USA. "Case XX USA * " (with lightning bolt S) and "62031 LHR" tang stamps. Double Oval 'Open C' Case shield. Chrome vanadium blades. Jigged delrin handle. Nickel Silver bolsters. Brass liner.

4 inches closed. 7 inches open. Made in USA. "CASE XX" and "6292" tang stamps. Double Oval 'Open C' CASE shield. Chrome Vanadium blades. Brown Jigged Bone handle. Nickel Silver bolsters. Nickel Silver liner.

Limited edition of 600. 3-5/8 inches closed. 6-3/8 inches open. Made in Germany. Front Tangs: FIGHT'N ROOSTER (two roosters) SOLINGEN ; Rear Tangs: FRANK BUSTER CELEBRATED CUTLERY GERMANY. Steel blades. Rear Blade 4 etch: 1 of 600 INTERNATIONAL FIGHT'N ROOSTER CUTLERY CLUB II 1985, and # engraved above the tang. Genuine Mother of Pearl handle. Nickel Silver bolsters. Brass liner.

4 inches closed. 6-1/4 inches open. Made in USA. " x x x  Case XX  *x*x* " (8 dot) and "USA 61953 L CV" tang stamps. Oval "Long C" Case XX shield. Jigged red bone handle. Chrome vanadium blades. Nickel Silver bolsters. Nickel Silver liner.

Limited edition of 300. 3-3/4 inches closed. 6-3/4 inches open. Made in Germany. Front Tangs: FIGHT'N ROOSTER (two roosters) SOLINGEN ; Rear Tang: FRANK BUSTER CELEBRATED CUTLERY GERMANY. Plain Bomb shield. Steel blades. Master Blade etched with STERLING FRANK WOLFGANG BUSTER 1989 1 of 300 and # above the tang. Silver Glitter Celluloid handle. Nickel Silver bolsters. Brass liner.

Limited Edition Single-blade Bullet Knife. 3-5/8 inches closed. 6-3/8 inches open. Made in USA. 'Remington UMC Made in U.S.A.' and 'A1173L' tang stamps. Shot gun shell shield. SS blade etched '2001 ONE OF 100 ATA GRAND AMERICAN CHAMPIONSHIPS' and 'Remington TRADEMARK'. Black/brown handle. Nickel Silver bolsters; front right bolster etched with serial number. Brass liner. With original box and paperwork.

5 inches closed. 8-7/8 inches open. Made in USA. "Case XX USA ***** " (Long C script; 5 dot with lightning bolt S) and "6143 SS" tang stamps. Plain bar shield. Stainless Steel blade. Smooth Antique Bone handle. Nickel Silver bolsters. Brass liner.

2-5/8 inches closed. 6-1/8 inches open. Made in USA. "  x x*x  CASE XX  *x*x*  " and "USA 6318 SS" tang stamps. Single Oval Long C "Case XX" shield. Stainless Steel blades. Rough black composition handle. Nickel Silver bolsters. Brass liner.

3-1/8 inches closed. 5-1/4 inches open. Made in USA. Front Tang Blade 1: x x CASE XX x x (4Xs, Longtail-C, Lightning Bolt S) ; Front Tang Blade 2: USA 102109W SS. Double Oval Open-C CASE shield. Stainless Steel blades. Blue Sparkle Composite handle. Nickel Silver bolsters. Brass liner.

Single Blade Bear Hunter Folding Lockback Knife. 3 inches closed. 5-1/2 inches open. 'Bear Hunter' and 'Solingen Stainless 440' tang stamp. Stainless Steel blades. Celluloid handle. Nickel Silver bolsters. Brass liner.

3-3/4 inches closed. 6-7/8 inches open. Made in Germany. Front Tangs: FIGHT'N ROOSTER (two roosters) SOLINGEN ; Rear Tang: FRANK BUSTER & SON CELEBRATED CUTLERY GERMANY. Plain Club shield. Stainless Steel blades. Master Blade etched with FIGHT'N ROOSTER TM. Yellow AND Green handle. Nickel Silver bolsters. Brass liner.

Limited edition of 500. Serialized longtail C on front bolster. 4-1/8 inches closed. 7-3/8 inches open. Made in USA. W.R. Case & Sons Bradford PA 19 USA 91 and TESTED XX 5394 W.R. Case & Sons Bradford PA tang stamp. Case Bullet shield. Stainless Steel blades. Sambar Stag handle. Nickel Silver bolsters. Brass liner.

3-7/8 inches closed. 6-1/4 inches open. Made in USA. "  x*x  CASE XX  x*x*x " (with lightning bolt S) and "USA 6355WH SS" tang stamps. Stainless Steel blades. Jigged red oak bone handle. Nickel Silver bolsters. Brass liner.

3-1/8 inches closed. 5-3/8 inches open. Made in USA. " CASE XX USA ******  " (6 dot with lightning bolt S) and "059L SS" tang stamps. Stainless Steel blade. Synthetic handle with mallard scene.

2-3/4 inches closed. 5 inches open. Made in USA. Front Tang Blade 1: x x CASE XX x x (longtail C with lightning bolt S); Front tang Blade 2: USA 6282 SP-SS. Oval CASE XX Script shield. Stainless Steel blade. Smooth Emerald Green Bone handle. Nickel Silver bolsters. Brass liner.

4 inches closed. 7-1/8 inches open. Made in USA. Front Tang: CASE XX. Double Oval 'Open C' Case shield. Carbon Steel blades. Brown jigged bone handle. Nickel Silver bolster. Brass liner.

5.4 ounces. 9-3/8 inches overall. 4-1/4 inch blade. 1/8 inch thick. Made in Taiwan. Front Tang: 471 (2001 symbol) ; Rear Tang: Taiwan. Stainless steel blade. Front blade ethc: BUCK. Black Diamondback textured Kraton handle.

Very rare Damascus blade. 4-7/8 inches closed. 8-5/8 inches open. Made in USA. BUCK 110 ^ U.S.A. tang stamp. Fat Stag handle. Nickel Silver bolsters. Nickel Silver liner.

3-3/4 inches closed. 6-3/4 inches open. Made in Germany. Front Tangs: FIGHT'N ROOSTER (two roosters) SOLINGEN ; Rear Tang Blade 1: FRANK BUSTER CELEBRATED CUTLERY GERMANY. Plain Bomb shield. Stainless Steel blades. Front Blade 1 etch: 1 of 800 WILD CARD 1991 and # above the tang. Tiger Swirl Corelon handle. Nickel Silver bolsters. Brass liner.

3-1/4 inches closed. 5-5/8 inches open. Stainless steel blade etched with the Gerber logo. Die-cast aluminum handle with rubber grips. Thumb stud on top edge of blade for easy one-handed opening with either the left or right hand. Stainless steel pocket clip etched "GERBER". Sturdy cam-lock keeps blade locked securely in place.

4-1/8 inches closed. 7-3/8 inches open. Made in USA. Front tang: x*x CASE XX x*x*x (5Xs, 3Dots, Longtail-C); Rear tang: USA 61048 SS. Oval CASE XX Script shield. Stainless Steel blade. Antique Bone handle. Nickel Silver bolsters. Brass liner.

4-1/8 inches closed. 7-3/8 inches open. Made in USA. "CASE XX U.S.A." and '3254' tang stamps. Double oval open C "CASE" shield. Chrome vanadium blades. Yellow Composition handle. Nickel Silver bolsters and liner.

Single Blade Vintage Classic Folding Lockback Knife. 3-1/2 inches closed. 6 inches open. Made in USA. "KA-BAR U.S.A." and "STAINLESS 1186" tang stamps. Stainless Steel blades. Wood handle. Nickel Silver bolsters and brass liner. With Boker box (not original) and paperwork.

Single Blade Special Edition Tracker Bullet Knife. 4-1/2 inches closed. 7-7/8 inches open. Made in USA. 'Remington UMC Made in USA' and 'R1306 1990' tang stamps. Bullet shield. Stainless Steel blades. Delrin Staghorn handle. Nickel Silver bolsters. Brass liner. With original box and paperwork.

4-1/8 inches closed. 7-3/8 inches open. Made in USA. "CASE XX *SS USA" (1 dot with lightning bolt S) and "CT254 SS" tang stamps. Special circle "1889-1989 Case xx" shield. Stainless steel blades. Christmas tree celluloid handles. Nickel Silver bolsters. Brass liner.

4 inches closed. 7-1/8 inches open. Made in Germany. Front Tangs: (H&R Logo) SOLINGEN GERMANY ; Rear Tang Blade 1: BERTRAM CUTLERY 313 PC/TW. Blade 2&3 Front Tangs: (H&R Logo) ROSTFREI. Tennessee Walking Horse Circle shield. Stainless Steel blades. Front blade 1 etch: Tennessee Walking Horse. Picasso Corelon handle. Nickel Silver bolsters. Brass liner.

Limited edition with edition number engraved on bolster. 2-Blade. 3-9/16 inches closed. 6-3/8 inches open. Made in USA. 'Remington UMC Made in U.S.A.' and '2000' and 'R1173' tang stamp. Mother of Pearl Bullet shield. SS blades engraved 'Millennium Baby Bullet' and 'Remington'. Exotic Buffalo Horn handle. Nickel Silver bolster. Brass liner. With original box, certificate of authenticity, and paperwork.

4-1/4 inches closed. 7-1/8 inches open. Made in USA. "BUCK 112 (arrow pointing down) U.S.A." tang stamp. Stainless Steel blade laser cut out with "NKCA". Serial"0024/800" etched onto back of blade. Rosewood handle etched "NKCA 2007 on the back. Round NKCA shield on the front. Nickel silver bolsters and liner.

Limited Edition. 2-3/8 inches closed. 4-1/4 inches open. Made in USA. Blade 1 front tang stamp: x*x CASE XX x x x (longtail-C with lightning bolt S); blade 2 front tang: USA 62154 SS. Jigged natural bone handle. Oval longtail-C Case XX shield. Nickel silver bolsters with longtail-C serialization on front right bolster. Brass liner.

Limited edition of 100. 3-3/4 inches closed. 6-3/4 inches open. Made in Germany. Front Tang: FIGHT'N ROOSTER (two roosters) SOLINGEN ; Rear Tang: FRANK BUSTER & SON CELEBRATED CUTLERY GERMANY. Plain Marquee shield. Steel blades. Master Blade etch: 1 of 100 Fight'n Rooster INTERNATIONAL CUTLERY CLUB II 1995 surrounded with filigree in gold, and # above the tang. Genuine Mother of Pearl handle. Nickel Silver bolsters. Brass liner.

1998 NKCA Youth Limited Edition 1 out of only 700 made. 3-1/8 inches closed. 5-1/4 inches open. Made in USA. "CASE XX USA ** " (2 dot with lightning bolt S) and "USA 62109X SS" tang stamps. Oval "CASE-XX" shield. Stainless steel blades. Master blade etched "1998 NKCA Youth Knife 1 of 700". Jigged Chestnut bone handle. Nickel Silver bolsters. Brass liner.

3-1/2 inches closed. 6-1/8 inches open. Made in USA. "CASE XX   x   " (with lightning bolt S) and "USA 62032 SS" tang stamps. Oval "CASE COLLECTORS CLUB" shield. Stainless steel blades etched "REGULAR MEMBER" and "2009" in red. Red Jigged Bone handle. Nickel Silver bolsters. Front right bolster. Brass liner.

Single Blade Limited Edition #1462 Lockblade Knife. 5  inches closed. 8-3/4 inches open. Made in USA. "SCHRADE+ U.S.A S.D. " tang stamp. Handle scrimshawed with Native American images. Brass bolsters. Front right bolster etched with serial #1462. Brass liner. With original box, paperwork, and beaded sheath.

4-1/8 inches closed. 7-3/8 inches open. Made in USA. "CASE XX STAINLESS USA" and "5154 SSP NKCA 1979" tang stamps. Double Oval 'Open C' CASE shield. Stainless Steel blade etched "NATIONAL KNIFE COLLECTORS 1979". Beautiful stag handle. Nickel Silver bolsters. Front right bolster etched with serial. Nickel Silver liner.

3-3/4 inches closed. 6-3/8 inches open. Made in USA. "Case XX USA ** " (2 dot with lightning bolt S) and "640045R" tang stamps. Single Oval 'Open C' CASE shield. Stainless Steel blades. Jigged delrin handle. Nickel Silver bolsters. Brass liner.

Limited edition of 200 made. 3-5/8 inches closed. 6-1/4 inches open. Made in Germany. Front Tangs: FIGHT'N ROOSTER (two roosters) SOLINGEN ; Rear Tang: FRANK BUSTER CELEBRATED CUTLERY GERMANY. Moustache shield. Steel blades. Master Blade etched with INTERNATIONAL FIGHT'N ROOSTER CUTLERY CLUB 1 of 200 1990 I and # above the tang. Genuine Mother of Pearl handle. Nickel Silver bolsters. Brass liner.

3-5/8 inches closed. 6-1/4 inches open. Made in USA. "CASE XX BRADFORD PA 19 USA 90" and "62131" tang stamps. Oval 'Closed C' CASE-XX shield. Chrome Vanadium blades. Master blade etched with canoe image. Chestnut Jigged Bone handle. Nickel Silver bolsters. Brass liner.

Vintage Fixed Blade Bowie Knife. 12-3/4 inches long. Made in Germany. Hand holding arrows logo and "SOLINGEN GERMANY" tang stamps. Blade etched "Original Bowie Knife". Imitation stag handle. Brass guard.

3-1/2 inches closed. 6-1/4 inches open. Made in USA. "  *x*x*  Case XX USA 61749L SS  x*x*x  " tang stamp. Single Oval 'Long Tail C' Case XX shield. Stainless Steel blade. Natural Pocket Worn Corn Cob Jigged Bone handle. Nickel Silver bolsters. Brass liner.

17 inches overall. 11-3/4 inch blade. Made in USA. Front stamp: 'Bark River Knives Escanaba MI A-2' rear stamp: 'CUSTOM 2014'. A-2 Steel blade. Sheep horn #2 handle. Brass guard. Original Bark River Knives box and leather sheath

3-5/8 inches closed. 6-3/4 inches open. Made in USA. Front tang: x*x Case XX x*x*x (with longtail C and lightning bolt S) ; Rear tang: USA 6185 SS. CASE arrowhead shield. Stainless Steel blade. Front master blade etch: LIMITED XX EDITION 1 of 2500. Lemon Lime Jigged Bone handle. Nickel Silver bolsters. Brass liner.

3-1/2 inches closed. 6-1/4 inches open. Made in USA. "  *x*x*  Case XX USA 61749L SS  x*x*x  " tang stamp. Oval 'Long C' Script Case XX shield. Stainless Steel blade. Chestnut jigged bone handle. Nickel Silver bolsters. Brass liner.